GE DMS Go Operator's Manual page 53

2.3.1f Setting the Time Before an Unattended Meter Powers Down (CONFIG - POWER DOWN)
The Power Down function powers down the instrument after a preset amount of time in which no one enters any inputs into the DMS Go;
the unit is receiving no button or joystick inputs from the user, and it is not receiving a valid thickness indication (as indicated by a display
solid lettering, rather than hollow). Countdown is reset by a valid measurement or keyboard activity.
In the MAIN menu, scroll to the CONFIG submenu using the joystick (
1.
2. Use the joystick (
DMS Go powers down. Your selections are 1, 2, 3, 4, 5, 10, 15, 30 minutes and Manual.
Note: GE recommends setting the selection to 5 minutes to avoid draining the battery.
3. After entering the number of minutes, use the joystick (
Menu
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
) to select the function titled POWER DOWN, and then (
www.BergEng.com
Berg Engineering & Sales Company, Inc.
).
) to enter the number of minutes before the
) to move to another function, or press HOME to return to the Main
Chapter 2. Instrument Setup
31
1-847-577-3980
Info@BergEng.com