Installing Cage Nuts For Mounting Brackets - HP A10500 Series Manual

Figure 9 Installed slide rails
NOTE:
To ensure stability of the rack, install the slide rails to the lowest possible position when installing a single
switch on the rack. To install multiple switches on the rack, mount the heaviest switch at the bottom of the
rack.

Installing cage nuts for mounting brackets

Before mounting the chassis to the rack, install cage nuts to the front square-holed brackets of the
1.
rack.
As shown in
mounting brackets and positions of the slide rails.
Install cage nuts on the square holes on each rack post, as shown in
2.
Figure 10, determine the positions of the cage nuts according to the holes on the
16
Figure 7.