Table of Contents
Advertisement
During work
● Follow the sequence of steps specific to each procedure.
● Use the relevant tools and instruments for each task as specified in the manual. If no particular tools are
specified, use commercially available tools and instruments which fit the purpose.
● Make sure that all measurement instruments and powered tools have been properly calibrated or periodically
inspected prior to use.
● Keep the maintenance area neat and tidy.
● Make sure that maintenance parts, materials, and removed parts are not placed in a passageway so they are
not tripped on by personnel.
● Wear eye protection if there is a risk of flying debris.
● When using sharp objects or cutting tools, keep fingers and other parts of your body away from the path of
the blade bit or point.
● After maintenance work is completed, before turning on power, make sure that all parts removed during
maintenance have been installed back in their original positions in the machine. Also make sure that no tool
or foreign material remains in the machine.
S-3
Advertisement
Table of Contents
