High Ceiling Operation - LG ATNH09GRLE2 Svc Manual

4.2 High Ceiling operation

This function is to adjust FAN Airflow rate according to ceiling height (For ceiling type product)
<Ceiling Height Selection Table>
Ceiling Height Level
01 Low
02 Medium
03 High
04 Very high
• Ceiling height setting is available only for some products.
• Ceiling height of ʻVery highʼ function may not exist depending on the indoor unit.
• Refer to the product manual for more details.
Copyright ©2013 LG Electronics. Inc. All right reserved.
Only for training and service purposes
If pressing button long for 3 seconds, it enters into
1
remote controller setter setup mode.
- If pressing once shortly, it enters into user setup mode.
Please press more than 3 seconds for sure.
If moving to ceiling height selection menu by pressing
2
it indicates as picture below.
Select ceiling height value by pressing
3
02:Medium, 03:High, 04:Very high)
Function Code Thermistor setting
4 Press button to save.
Pressing button will exit settings mode.
5
❈ After setup, it automatically gets out of setup mode if there is no button input
for 25 seconds.
❈ When exiting without pressing set button, the manipulated value is not
reflected.
Decrease the indoor airflow rate 1 step from standard level
Set the indoor airflow rate as standard level
Increase indoor airflow rate 1 step from standard level
Increase indoor airflow rate 2 steps from standard level
- 40 -
Part 2 Functions & Controls
button. (01:Low,
Description
button,
LGE Internal Use Only