Playing Discs - Sony DVP-NS300 Operating Instructions Manual

Playing Discs
wol@Bw
Depending on the DVD or VIDEO CD, some
operations may be different or restricted
Refer to the operating instructions supplied
with your disc
POWER
Power indicator D &
n
AUDIO -
1
Turn on your TV
2 Switch the input selector on the TV
to the player.
When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the
appropri,ate channel.
3
Press POWER on the player.
The player enters standby mode and the
power indicator lights up in red
4
Press 62 on the player, and place a
disc on the disc tray
The player automatically turns on and
the power indicator lights up in green
With the playback side facing down
5
Press D
The disc tray closes, and the player
starts playback (continuous play)
Adjust the volume on the TV or the
amplifier (receiver)
After following Step 5
Depending on the disc, a menu may appear
on the TV screen You can play the disc
interactively by following the instructions on
the menu DVD (page 3 I), VIDEO CD (page
32)
To turn on the player
Press the POWER switch on the player The
player enters standby mode and the power
indicator lights up in red Press I/& on the
remote The player turns on and the power
indicator lights up in green In standby mode,
the player also turns on by pressing 62 on the
player or by pressing D
To turn off the player
Press I/& on the remote The player enters
standby mode and the power indicator lights
up in red To turn off the player completely,
press POWER on the player
While playing
a disc, do no turn off the player by pressing
POWER Doing so may cancel the menu
settings When you turn off the player, first
press
n
to stop playback and then press 1/b
on the remote
28