Chapter 2 - Strata Ctx100 Installation; Inspection; Packaging And Storage; Site Requirements - Toshiba Strara CTX Series Installation And Maintenance Manual

Strata CTX100 Installation
This chapter explains how to install the Strata CTX100 system. It includes information on site
requirements, wiring diagrams, and step-by-step instructions on how to install the unit(s), the ground
wiring, AC power cabling, reserve power (battery backup) cabling, and PCB cabling.

Inspection

1. When the system is received, examine all packages carefully and note any visible damage. If any
damage is found, do not open the packages. Contact the delivery carrier immediately and make the
proper claims.
2. After unpacking (and before installing), check the system against the packing list and inspect all
equipment for damage. If equipment is missing or damaged, contact your supplier immediately.
3. Be sure to retain original packaging materials for re-use when storing or transporting system
hardware.

Packaging and Storage

When handling (installing, removing, examining) PCBs, do not touch the back
CAUTION!
(soldered) side or edge connector. Always hold the PCB by its edges.
When packaging and storing the system, remove PCBs from the system cabinet (the power supply
may remain installed in the cabinet for storage and shipment). PCBs should be packaged in their
original antistatic bags for protection against electrostatic discharge. Be sure to package equipment
in its original shipping containers.

Site Requirements

This section defines the installation site requirements necessary to ensure a proper operating
environment for the CTX100. Also included are grounding requirements.

Input Power

The Base Cabinet or the Base and Expansion Cabinet together require an input power source of
240VAC, 60 Hz, 15 amps. Each cabinet plugs into an AC power outlet. Each cabinet requires 0.7 amps
AC from the power source or 1.4 amps AC combined. The power supply cord for each cabinet is
1.38m (4.5ft.) long with a standard three-pin 240VAC plug.
For UK power considerations please refer to the chapter 'Notes to Users' at the end of this
manual.
Strata CTX I&M September 2002
2
2-1