Table of Contents
Advertisement
16
Driver Setup
This segment explains the method of setting up the driver.
At first, Read "Before installation" and select an appropriate procedure.
Preparation
For the first time installation, see "Install the Drivers" (page17)
See "Driver version confirmation" (page16),if this product has been used before and run update or
installation by an appropriate procedure according to the driver version.
Driver name
Chelsio T3 Ndis Function driver
Chelsio S310 10G Ethernet Function Enumerator
When drivers are uninstalled from the system, See "Uninstalling the Driver" (page18)
Driver version confirmation
1. Open [
Control Panel
2.
Open [ Administrative Tools ] -> [ Computer Management ] -> [ Device Manager ]
3. Open [
Device Manager
[
Properties
4. Open [
Driver
Confirm it is the same version as driver information on the table below
5. Open [
Device Manager
open the [
6. Open [
Driver
Confirm it is the same version as driver information on the table below.
Driver Information
Driver name
Chelsio T3 Ndis Function driver
Chelsio S310 10G Ethernet Function Enumerator
].
] -> [
Chelsio T3 Ndis Function driver
]
] tab and confirm the [
] -> [
S310 10G Ethernet Function Enumerator
].
Properties
] tab and confirm the [
Version
Procedure
See "Install the Drivers"(page17)
N/A
See "Update the Drivers"(page19)
1.4.6.1
1.4.14.5
Installation or update is unnecessary.
].
Driver Version
].
Driver Version
version
1.4.14.5
1.4.14.5
] and right click to open the
] and right click to
Advertisement
Table of Contents
