Using Link Operation; Controlling Hdmi Equipment Using Link Operation - Sharp AQUOS Operation Manual

sharp operation manual
>>

Using LINK Operation

<<

Controlling HDMI Equipment Using LINK Operation

What's LINK Operation?
• Using the HDMI CEC (Consumer Electronics Control) protocol, with LINK Operation you can
interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD).
• LINK Operation allows you to operate the HDMI-connected equipment with one remote control.
NOTE
• For connecting the TV to LINK-compatible equipment, use commercially available cables.
• Point the remote control toward the TV, not to connected HDMI equipment.
• Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMI-
certified cable.
• Up to 2 pieces of HDMI recording equipment and one AV amplifier can be connected using this
system.
• These operations affect the HDMI equipment selected as the current input source. If the
equipment does not operate, turn on the equipment and select the appropriate input source using
INPUT.
• The LINK feature may not operate properly when an HDMI splitter or AV selector unit is used.
These devices may cause interruptions to the image and/or sound.
file:///E:/hejiaye/html/B123389-00_EN-FR-ES/Base%20data/HTML/eng/6-1.html?next
Connected LINK-compatible devices can be operated without changing the settings of the remote
control unit.
The OPTION button will function only when LINK Operation is used.
Control the LINK-compatible audio system
Set the volume of LINK-compatible audio system.
NOTE
• The steps in "HDMI CEC LINK" on
page 6-2 need to be completed beforehand.
• Refer to this operation manual and the operation manual of the LINK device to be used with this
TV.
Buttons for playing mode
Buttons
/ / / Select a desired item
ENTER Activate the selected function
A (red) Stop
B (green) Previous chapter
C (blue) Play
D (yellow) Next chapter
RETURN Go back to the previous page
EXIT Exit from the page
ENG 6-1
Description
Page 1 of 1
2020/3/25