Sony DVCAM DSR-PDX10 Service Manual page 317

Using the colour bar
If you press BARS, the colour bar is displayed on the screen.
Use the colour bar in the following cases:
– At the beginning of the recording, the recorded images may be unstable. To avoid
this, record the colour bar first and start recording the desired images when the
captured images become clear.
– To adjust screen colour.
Press BARS while the POWER switch is set to CAMERA.
If you press BARS again the colour bar disappears.
When you adjust colour on the screen
Connect your camcorder to the TV (p. 47) and adjust image colour on the TV screen.
While the colour bar is displayed
The following functions do not work. However, the settings before the colour bar is
displayed are retained.
– Backlight
– Spot light
– Digital effect
– PROGRAM AE
– Shutter speed adjustment
– White balance adjustment
– Exposure
– MEMORY MIX
While the colour bar is displayed during Digital effect or MEMORY MIX
These effects cannot be added on the colour bar.
While using the fader
The colour bar cannot be displayed.
BARS
65