Panasonic CF-52 Series Operating Instructions Manual page 26

Troubleshooting (Basic)
Touch Pad/Touchscreen
Cannot input using the
touch pad.
Cannot input using the
touchscreen.
Cannot point the correct posi-
tion using the included stylus.
Reference Manual
The Reference Manual is
not displayed.
CD/DVD Drive
The tray does not come out
although inserting a pointed
object to the emergency
hole.
Reinstalling B's Recorder/B's CLiP
A serial number is
requested when reinstalling.
Others
No response.
26
Set [Touch Pad] to [Enabled] in the [Main] menu of the Setup Utility.
The drivers for some mice may disable the touch pad. Check your mouse's operat-
ing instructions.
Set [Touchscreen Mode] to [Auto] or [Tablet Mode] in the [Main] menu of the Setup Utility.
Set [Touchscreen Mode] to [Auto] or [Touchscreen Mode] in the [Main] menu of the
Setup Utility.
When mouse drivers are installed (i.e. IntelliMouse), the touchscreen does not work.
Reinstall the touchscreen driver.
Perform the touchscreen calibration (
Install Adobe Reader.
<For localized OS model>
A Log on to Windows as an administrator.
B Click (Start) and input "c:\util\reader\AdbeRdr80_en_US.exe" in [Start
Search] then press Enter.
C Update Adobe Reader to its latest version.
If your computer is connected to the internet, start up Adobe Reader and click
[Help] - [Check for Updates...].
B Click [start] - [Run], input [c:\util\reader\AdbeRdr70_enu_full.exe], then click [OK].
C Update Adobe Reader to its latest version.
If your computer is connected to the internet, start up Adobe Reader and click
[Help] - [Check for updates now].
<For MUI OS model>
page 14
A pin of 1.3 mm in diameter is recommended to
remove a disc using the emergency hole (A). When
the diameter of the pin is smaller than this, insert the
pin slightly downward.
Input the following serial number
B's Recorder:
B's CLiP:
Press Ctrl+Shift+Esc to open Task Manager and close the software application
that is not responding.
An input screen (e.g., password input screen at startup) may be hidden behind
another window. Press Alt+Tab to check.
Press the power switch for four seconds or longer to shut down the computer, and then press
the power switch to turn it on. If the application program does not work normally, uninstall and
reinstall the program. To uninstall,
click (Start) - [Control Panel] - [Uninstall a program].
click [start] - [Control Panel] - [Add or Remove Programs].
page 15).
A