Chapter 4. Configuring Via Web-Based Interface; Setup Wizard - D-Link DIR-615 User Manual

DIR-615 Wireless N300 Router
User Manual
CHAPTER 4.
INTERFACE

Setup Wizard

To start the Setup Wizard, go to the Settings / Setup Wizard section. On the opened page, click
the OK button and wait until the factory default settings are restored.
!
If your web browser displays a certificate error, please click Continue or Confirm .
If you perform initial configuration of the router via Wi-Fi connection, please make sure that you
are connected to the wireless network of DIR-615 (see the WLAN name (SSID) on the barcode
label on the bottom panel of the device) and click the NEXT button.
Click the START button.
On the opened page, click YES in order to leave the current language of the web-based interface or
click NO to select another language.
CONFIGURING
Figure 21. Restoring the default settings in the Wizard.
Figure 22. Checking connection to the wireless network.
Figure 23. Starting the Wizard.
Figure 24. Selecting a language.
Page 30 of 163
Configuring via Web-based Interface
VIA WEB-BASED