Installation; Host System Connection - Hitachi SH7760 Solution Engine2 Overview

2. Installation

2.1 Host System Connection

To use the monitor program, connect the host interface connector (CN1) of Solution Engine2 to the host system
with an RS-232C cross cable (accessory). Figure 2.1 shows a host system connection method. Figure 2.2
shows the pins of a serial interface connector. Table 2.1 shows the signals of the serial interface connector.
RS-232 cross cable (accessory)
Solution Engine2
Figure 2.1 Host System Connection Method
CN1
1
Figure 2.2 Serial Interface Connector Pin Layout
15
16
Host system