Connecting Cables; Using The Av Cable - Huawei DC351 User Manual

4 Connecting Cables

Before connecting or disconnecting a cable, power off the STB, TV

and all the devices connected to them.
Before connecting, check that all the necessary cables are available.

Then connect the cables as shown in the following figures.
Do not plug or unplug a cable when a device is powered on.

The figures shown in the following sections are only for your

reference. The actual appearance may differ slightly from that shown
depending on the product you purchased.
There are three manners to connect the STB and your TV, depends on the components
that you intend to connect and the desired signal quality and the styles of your TV.

4.1 Using the AV Cable

Step 1
Using a coaxial cable, connect CABLE IN interface on the STB to the cable
TV interface on the wall.
Step 2
Connect the AV cable's yellow, white, and red connectors at one end to the
STB's VIDEO , AUDIO L , and AUDIO R interfaces respectively.
Step 3 Connect the video and audio cable's yellow, white, and red connectors at the
other end to your TV's corresponding video and audio interfaces.
Step 4 Use the power adapter to connect the STB's power interface to a working
power socket, extension cord or surge protector.
F C C I D : Q I S D C 3 5 1
C o n s u m o d e e n e r g i a
1 0 0 W h
C O F E T E L : X X X X X - Y Y Y
1A
9