Siemens SINAMICS S120 Equipment Manual page 296

Options
7.5 DRIVE-CLiQ coupling
7.5.5 Installation
Figure 7-22 Hole drilling template for installation
1. Fit the DRIVE-CLiQ coupling to the mounting surface in accordance with the drilling
2. Remove the protective caps on the DRIVE-CLiQ coupling.
3. Insert the DRIVE-CLiQ connector at both ends of the DRIVE-CLiQ coupling.
7.5.6 Technical specifications
Table 7-18
DRIVE-CLiQ coupling 6FX2003-
0DC1x
Weight
Degree of protection
7-44
template.
Technical data
Unit
kg
IP67 acc. to EN 60529
Equipment Manual, (GH2), 03/2006 Edition, 6SL3097-2AC00-0BP3
0.14
Equipment Manual for Booksize Power Units