Page 2
GENERAL The RLN4853 Adapter Cable is a passive cable, used to make connections to the mobile Professional Radio when the radio is to be programmed or flashed via the accessory port. The adapter cable has a 20-way accessory connector at one end, which connects to the radio, and an 8-pin Telco connector (which will accept a 10-pin Telco plug) at the other end.
Page 3
SCHEMATIC DIAGRAM 8-way Telco 20-way accessory FLT A + (12V) Ground Ground Bus + Switched Battery Voltage + Bus + Boot Control CONNECTOR DETAIL Viewed from P2 (Female) Front (pin end) To Mobile Radio Accessory of Connector Connector 275± 5mm cable Pin 8 Pin 1 Telco Connector...