System Utilization - Siemens SINUMERIK 840D sl Commissioning Manual

Service and diagnostics

13.3 System utilization

13.3 System utilization
For the NC areas you can display the system resources (utilization display) currently being
used: This shows you the net and gross runtimes for the position controller, interpolator, and
forward motion.
Proceed as follows
124
1. Select the "Diagnosis" operating area.
2. Press the menu forward key.
New horizontal softkeys are displayed.
3. Press the "Syst. utiliz." softkey.
The "System utilization" window appears.
You can track the dynamic utilization display.
4. Press the "Stop" softkey to stop the display update.
5. Press the "Start" softkey to refresh the values.
Commissioning Manual, 07/2007, 6FC5397-1DP10-2BA0
HMI sl (IM9)