Fan Status Led - HP 12500 Series Installation Manual

LED

Fan status LED

Table 50 Fan status LED description
LED
FAN (green-red)
Power status LED
Table 51 Power status LED description
MPU LED
PWR (green-red)
MPU LEDs
Table 52 MPU LED description
MPU LED
ACT (green)
RUN (green-red)
LPU LEDs
Typically an LPU has two types of LEDs: interface and RUN LEDs.
Status Description
Steady on The MPU is faulty.
Off The MPU is faulty.
Status Description
Flashing green All the fan trays are operating properly.
Flashing red One or two fan trays are faulty.
Steady on The MPU is faulty.
Off The MPU is faulty.
Status Description
Flashing green All the power frames are operating properly.
Flashing red One or two power frames are faulty.
Steady on The MPU is faulty.
Off The MPU is faulty.
Status
Steady on
Off
Flashing green
Flashing red
Steady on
Off
114
Description
The MPU is in active state.
The MPU is in standby state.
The MPU is operating properly.
The MPU is faulty.
The MPU is faulty.
The MPU is faulty or not in position.