Replacing A Vcn520 - Huawei FusionModule2000 V500R003C10 Maintenance Manual

FusionModule2000 Smart Modular Data Center
Maintenance Guide
6.
7.
Step 4 Check the hard disk indicators to determine whether the new hard disk works properly.
----End
Follow-up Procedure
If the new hard disk is abnormal, immediately contact Huawei technical support engineers.

5.4.2.3 Replacing a VCN520

Prerequisites



Context
Videos cannot be recorded during the replacement of the VCN520.
Issue 04 (2020-01-03)
Figure 5-20 Installing a hard drive
Install a disk in No.0 location. Install the disk in No.0 location in the same way for
installing a disk in No.1 location. During disk installation, ensure that the direction for
pushing the disk in No.0 location is opposite to that for pushing the disk in No.1
location.
Install the upper cover of the chassis. Place the upper cover of the chassis. Fasten the
three screws on the bottom cover of the chassis and the six screws on the left and right
sides of the chassis to fix the upper cover of the chassis.
Recommended tools: Phillips screwdriver
A VCN520 needs to be replaced.
A spare VCN520 of the same model is available and functional.
Copyright © Huawei Technologies Co., Ltd.
5 Parts Replacement
66