Setting Parameters On The Ecc800 Webui (Ecc800 Scenario) - Huawei iBAT 2.0-CIM01C2 User Manual

iBAT 2.0-CIM01C2
User Manual
----End
5.2 Setting Parameters on the ECC800 WebUI (ECC800
Scenario)
Procedure
Step 1 Log in to the ECC800 WebUI as an administrator.
Step 2 Choose Monitoring > Power Distribution > iBOXn > Running Parameters.
Step 3 Set the following parameters and retain default values for other parameters.
Table 5-1 Setting iBOX parameters
Parameters
iBOX single battery qty.
Batt installation time
Battery string capacity
Current source
Issue 07 (2019-01-02)
Figure 5-4 Battery Curve
Copyright © Huawei Technologies Co., Ltd.
Description
Total number of batteries
monitored by the iBOX.
Actual time at which
batteries are installed.
Capacity of a single battery
multiplied by the number of
battery strings.
Select a Hall effect sensor
(xxx A).
The actual specifications of
the Hall effect sensor will
apply.
5 System Commissioning
Remarks
Set according to the battery
parameters planned by the
customer.
N/A
Obtain the battery capacity
from the battery label or
document.
The actual specifications of
the Hall effect sensor
prevail.
45