Tv Back Panel Connections - Toshiba 50HPX95 Owner's Manual

TV back panel connections

For an explanation of cable types, see page 14.
TV back
5
6
1 2
1
and
VIDEO 1 IN VIDEO 2 IN
(composite) video and standard audio inputs plus optional
S-video inputs for connecting devices with composite video
or S-video output.
Note: Standard (composite) video and S-video cables carry
only video information; separate audio cables are required for a
complete connection.
2
and
®
ColorStream HD-1
®
of ColorStream high-definition component video and
standard stereo audio inputs for connecting devices with
component video output, such as a Toshiba DVD player
®
with ColorStream . See pages 18 and 20.
Note: Component video cables carry only video information;
separate audio cables are required for a complete connection.
3
— Standard composite video and analog audio
A/V OUT
outputs for connecting a VCR for editing and dubbing. See
page 21 for details.
12
Chapter 2: Connecting your TV
Before connecting the external device to
the TV, remove the applicable panel cover
by squeezing the tabs in the direction of
the arrow (%) and pulling the cover.
7
4
!¢
3
* The power cord supplied with this product is to be used in United States and Canada only. If this product is
used in another country, use a power cord which confirms to the law or regulations of that country.
Do not remove the noise filter from the power cord. The noise filter is to reduce the interference in image or
sound of other electronic equipment.
— Two sets of standard
— Two sets
®
ColorStream HD-2
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
Wall outlet
120V AC 60Hz
0
!™
8
9
!¡
4
VARIABLE AUDIO OUT
for connecting an analog amplifier with external speakers.
See page 23.
5
™
TheaterNet (IR) OUT
controlled devices through the TV. You can connect up to
two devices with either one of the enclosed IR blaster cables,
and then control the devices using the TV's IR pass-through
™
or TheaterNet (on-screen device control) features. See
pages 24 and 51.
TheaterNet™ (IR) IN
other devices. See page 26.
6
— For use when connecting a DVI device
HDMI AUDIO IN
with analog audio output to the HDMI input. See page 22.
Also see item 8 on the next page.
___________
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
Power cord*
!£
— Standard analog audio outputs
— For controlling infrared remote-
— For connecting to IR OUT on