Download Print this page

Advertisement

Instruction Manual
Model Numbers
DT6101SAU
DT6101SSA
Part NO. 383EW5N001T(MFL30049915)

Advertisement

loading

Summary of Contents for LG DT6101SAU

  • Page 1 Instruction Manual Model Numbers DT6101SAU DT6101SSA Part NO. 383EW5N001T(MFL30049915)
  • Page 2: Table Of Contents

    Instructions Manual INDEX RECOMMENDATIONS AND SUGGESTIONS ........................3 CHARACTERISTICS................................4 INSTALLATION ..................................5 USE......................................7 MAINTENANCE..................................8...
  • Page 3: Recommendations And Suggestions

    RECOMMENDATIONS AND SUGGESTIONS INSTALLATION The manufacturer will not be held liable for any damages resulting from incorrect or improper installation. The minimum safety distance between the cooker top and the extractor hood is 650 mm. Check that the mains voltage corresponds to that indicated on the rating plate fixed to the inside of the hood.
  • Page 4: Characteristics

    CHARACTERISTICS Dimensions Components Ref. Q.ty Product Components Hood Body, complete with: Controls, Light, Blower, Filters Directional Air Outlet grille Flange ø 150 mm Reducer Flange ø 150-120 mm Damper Closing element Ref. Q.ty Installation Components Screws 3,5 x 16 Screws 2,9 x 12,7 Screws 2,9 x 9,5 Q.ty Documentation Instruction Manual...
  • Page 5: Installation

    INSTALLATION Drilling the Support surface and Fitting the Hood • The Hood can be fitted directly on the lower surface of the Wall Units (650 mm min. above the Cooker Top) using the snap- on Side Supports. • Make an opening on the lower surface of the Wall Unit, as indicated.
  • Page 6 ø 120 Connections DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø 150 or 120mm, the choice of which is left to the installer. • Install the Flange ø 150 mm 9. •...
  • Page 7: Use

    By pulling out the sliding panel it is possible to automatically activate all the hood functions. By simply closing the sliding panel all the functions are switched off. SWITCH FUNCTIONS Light Switches the lighting system on and off Motor Switches the extractor motor on and off 1.
  • Page 8: Maintenance

    MAINTENANCE Grease filters CLEANING METAL CASSETTE GREASE FILTERS • The filters must be cleaned every 2 months, or more frequently in case of particularly heavy use of the hood. Filters can be washed in a dishwasher. • Pull out the sliding suction panel. •...
  • Page 12 436003255_ver2...

This manual is also suitable for:

Dt6101ssa