Input Select; Sleep - Toshiba HDD-J35 Owner's Manual

INPUT SELECT

1.
The recorder has a set of Component and Composite Video input which allows connection to external
sources like the DVD player, cable box, satellite box or VCR. (For connections, refer to CONNECTING
TO DVD PLAYER and CONNECTING TO CABLE BOX/SATELLITE BOX/VCR on page 23)
2.
Press the INPUT SELECT button
programs.
OFF - AIR
Important: Display is only available for output connection made via HDMI.

SLEEP

The "SLEEP" button on the remote control is used to set the off-timer value.
To set the off-timer:
1.
Press "SLEEP" button to start the timer at "OFF".
2.
Next press of the "SLEEP" button (within 5 seconds) will set the recorder to the next off-timer value. Use the
"SLEEP" button to set the desired off-timer value.
3.
The menu turns off after 5 seconds, and the timer starts.
OFF 30 min
To check the remaining time:
1.
Once the off-timer has been set, press "SLEEP" button once.
2.
Current remaining time is displayed on the screen, and then turns off after 5 seconds.
To change the off-timer:
1.
Once the off-timer has been set, press "SLEEP" button once.
2.
Current remaining time is displayed on the screen. Before the OSD turns off, press "SLEEP" button again
within 5 seconds, and the off-timer will be changed to the next bigger off-timer value.
For example, if current remaining time is "28 min", press "SLEEP" button again, and off-timer will be
changed to "30 min".
28 min
OFF 30 min
If current remaining time is "74 min", press "SLEEP" button again and off-timer will change to "90 min".
OFF 30 min
Note: When the sleep timer has only 1 minute left, an OSD "SLEEP 1 min." will automatically appear and stay on
the screen. When the sleep timer counts down to 0, the recorder automatically shuts down by itself to
standby mode.
52
to select between the various input sources including off-air
L1 L2
60 min 90 min
60 min 90 min
74 min
60 min 90 min
120 min
120 min
120 min