Features And Functions - Siemens SIMATIC NET System Manual

SCALANCE network components
4.5 SCALANCE X Industrial Ethernet Switches
4.5.18.2

Features and functions

Features
The individual devices have the characteristics shown in the following table:
Modular design
Gigabit Ethernet
PoE Power over Ethernet
Diagnostics LED
Redundant power supply
Railway applications
On site display (Set button)
C-PLUG slot
● Suitable / available or according to the specified standard
Only for devices variants with 24 V DC
1)
Functions
All devices have the following functions:
● Configuration with the Primary Setup Tool (PST) V3 or higher;
to use the Primary Setup Tool to assign the IP address, the switches must be accessible
via Ethernet.
● Configuration of the IP address with DHCP
● Configuration with STEP 7
● Web Based Management
● Command Line Interface/Telnet
● SNMP / SNMP-supported diagnostics
● SNTP
● Ring redundancy including RM functionality
● Standby redundancy
● MRP interconnection
● STP/RSTP (Spanning Tree Protocol/Rapid Spanning Tree Protocol) as well as RSTP+
● Passive Listening
● Topology support (LLDP)
● VLAN (Virtual Local Area Network)
● GVRP (Generic VLAN Registration Protocol)
180
X308-2M X308-2M TS
XR324-12M XR324-12M TS
XR324-4M EEC
●
●
-
●
●
1)
-
●
●
System Manual, 09/2019, C79000-G8976-C242-10
X308-2M PoE
XR324-4M PoE
● ●
● ●
- ●
● ●
● ●
1)
● -
● ●
● ●
Industrial Ethernet