Additional Settings - Siemens SINUMERIK 840D sl Commissioning Manual

Tool management
12.1 Machine data for tool management
MD51221 $MNS_ACCESS_TM_TOOL_REACTIVATE
MD51222 $MNS_ACCESS_TM_TOOL_MEASURE
MD51223 $MNS_ACCESS_TM_TOOLEDGE_CREATE
MD51224 $MNS_ACCESS_TM_TOOLEDGE_DELETE
MD51225 $MNS_ACCESS_TM_MAGAZINE_POS
12.1.3

Additional settings

Additional settings
You can enable further functions on the user interface via the following machine data /
setting data:
MD52270 $MCS_TM_FUNCTION_MASK
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
SD54215 $SNS_TM_FUNCTION_MASK_SET
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
128
Creating tool at the magazine location is not permitted.
Load/unload lock if the machine is not in the reset state.
Load/unload lock for EMERGENCY OFF.
Loading/unloading or relocating tool in/out of spindle locked.
Tool loaded directly into spindle.
Using the grinding configuration file.
Relocating a tool in/out of spindle is permitted despite lock (see bit 3).
Tool is created using the number.
Hide tool relocation.
Hide magazine positioning.
Reactivate tool with magazine positioning.
Reactivate tool in all monitoring types.
Hide reactivating tool.
Diameter display for rotating tools.
Cutting edge parameters 6 (tool nose radius) and 15 (wear radius) are not displayed as a
radius value, but as a diameter value for the following tool types: Types 100 to 299, 580,
710, 711, 712, 713, 714 and 725.
Cutting edge parameter 7 (outside radius) is not displayed as a radius value, but as a
diameter value for the following tool types: Types 140 and 714.
M4 is the standard direction of rotation for all turning tools. When creating turning tools,
the direction of rotation is pre-assigned with M4.
A name is not suggested when creating a tool.
Input lock, tool name and tool type for loaded tools. For loaded tools, the tool name and
the tool type can no longer be changed.
Input lock for loaded tools if the channel is not in the reset state.
Access level, TM, reactivate tool.
Access level, TM, measure tool.
Access level, TM, create tool cutting
edge.
Access level, TM, delete tool cutting
edge.
Access level, TM, position magazine.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)