Hotkeys - Toshiba A200 Series User Manual

Press Fn + Ctrl to simulate the enhanced keyboard's right Ctrl key.

Hotkeys

Fn + ESC
Fn + F1
Fn + F2
Fn + F3
Fn + F4
Fn + F5
Default resolution for simultaneous mode is set to WXGA (1280 × 800). If
you connect an RGB (Monitor) that is not WXGA resolution, change it in
"Display Properties".
Fn + F6
Fn + F7
Fn + F8
Fn + F9
Fn + F10
Fn + F11
Fn + F12
Fn + Space
User's Manual
Mute – Turns the volume on and off.
Lock – Enters "Lock computer" mode. To restore your
desktop, you need to log on again.
Power Plan Mode – Displays the power save modes
and lets you change the power settings
Sleep – This hot key switches the system to Sleep mode.
Hibernate – This hot key switches the system to
Hibernate mode.
Output – Changes displays.
Brightness (decreases)
Brightness (increases)
Wireless – Pressing this hot key allows you to switch
between active wireless devices if the wireless
communication switch is switched on.
TouchPad/Dual Mode Pad – Enables or disables the
TouchPad/Dual Mode Pad function.
Cursor Keypad On/Off – This hot key enables/disables
the embedded cursor keypad. See chapter 3 for more
information.
Numeric Keypad On/Off – This hot key
enables/disables the embedded numeric keypad. See
chapter 3 for more information.
Scroll Lock On/Off
Change Resolution – Each time when you press the
these hot keys, the resolution will change depending on
the specification of the LCD display panel-with a WXGA
system. You can change the resolution between
800 × 600 pixels and 1024 × 768/1280 × 800 pixels.
The Keyboard
5-3