Installation; Use Of Dfp-R3000 For 70 Mm Film - Sony DFP-R3000 Installation Manual

5. Installation

The following describes how to install the DFP-R3000 to
the various projectors indicated below.
1. Strong International : Simplex 35/70
Century JJ
2. Kinoton : Noleroco AA-II35/70
3. Cinemeccanica : V9, V8, V5
4. Christie : P35
Install the DFP-R3000 to a projector according to the
following procedure.
Installation Procedure
Installation to projector
↓
Connecting to DFP-D3000
↓
Checking and adjustment after installation
Notes on Installation
. Use the adapter (A) (Supplied with DFP-R3000) or
adapter (EA) (Prepared separately) supplied when
installing the DFP-R3000.
However, parts additional to adapter (A)/adapter (EA)
will be required for some projectors.
Checks the parts required in the procedure for installing
to projectors in "5-2. Installation to the Projector".
. Attach the adapter (A)/adapter (EA) using the special
tool.
DFP-R3000
5-1.

Use of DFP-R3000 for 70 mm Film

To use the DFP-R3000 for 70 mm film, the front panel,
and roller guide need to be replaced, etc.
Replace according to the following "Procedure".
Required Parts
Front panel (70) assembly ;
1 (Sony part No. X-3168-037-1)
Front panel (70) R ; 1 (Sony part No. 3-200-455-01)
Optional guide assembly (70) ;
1 (Sony part No. X-3168-071-1)
Optional guide T assembly (70) ;
1 (Sony part No. X-3168-074-1)
Support ; 5 (Sony part No. 3-194-814-01)
Washer (SW4) ; 1 (Sony part No. 7-623-210-22)
Screw (B3 x 4) ; 6 (Sony part No. 7-682-545-04)
Required Tools
Philips screwdriver
Nut driver (d = 5 mm)
Hex wrench screwdriver (across ; 3 mm)
1-3 (E)