Checking Status Led - NEC Express5800 Series Maintenance Manual

Chapter 1 Maintenance
2.3

Checking STATUS LED

Check LED indication when:
•
Power on the server and while the server is running.
•
Before shutting down the server.
LEDs to be checked:
LEDs located at front of the server
LEDs on hard disk drives installed in 2.5-inch hard disk drive bay
If the indicator shows the server abnormality, contact your salses representative.
For the functions and descriptions of the LED, refer to Chapter 1 (6.1 Error Messages by LED Indication).
Slot 1 Slot 3
Slot 0 Slot 2 Slot 4
Slot 0 Slot 2
Slot 1 Slot 3
Express5800/R320c-E4, R320c-M4 Maintenance Guide (VMware)
Slot 5 Slot 7
Slot 6
Slot 4 Slot 6
Slot 5 Slot 7
2. Daily Maintenance
19