Table of Contents
Advertisement
DOK-SUPPL*-VEH*30.2***-PR03-EN-P
Rexroth IndraControl VEH 30.2 Hand-Held Terminal
8
Maintenance and Installation
8.1
General Information
Maintenance
8.2
LCD Display
8.3
Maintenance of the IndraControl VEH 30.2
8.4
Measures in Case of Malfunctions at the
IndraControl VEH 30.2
The IndraControl VEH 30.2 Hand-Held Terminals are maintenance-free.
However, some components are subject to wear and are to be replaced.
Include the following measures in the maintenance schedule:
●
The screen is to be cleaned at least once a week using an antistatic fab‐
ric or a cleansing agent containing alcohol.
WARNING
●
Do not use any solvents (e. g. diluents)!
●
Do not use compressed air, steam jet and high pressure cleaning devi‐
ces!
●
At least once a year, all plug and terminal connections of the compo‐
nents are to be checked regarding proper tightness and possible dam‐
age.
Check that cables are not broken or crushed. Damaged parts must be
replaced immediately.
A fading backlight causes a progressive deterioration of the readability of the
LCD display, so that a backlight exchange is required. For further information
please contact the Bosch Rexroth Service, see
Support" on page
101.
The IndraControl VEH 30.2 is designed for the use in the industrial environ‐
ment. No special appearance care is required for the IndraControl VEH 30.2.
We recommend to keep the device away from humidity, oils and emulsions. If
from the ergonomic point of view a particular degree of fouling is achieved
the IndraControl VEH 30.2 has to be cleaned with a smooth, dry and fuzz-
free cloth to restore e. g. the full grip.
The IndraControl VEH 30.2 does not contain any components to be main‐
tained by the operator. The housing must not be opened for maintenance
purposes.
The following table contains different types of malfunctions, possible causes
and remedies, see
tab. 8-1 "Error table" on page
Malfunctions that are not mentioned in the table require a check of the device
at the manufacturer. Information about the manufacturer is placed on the type
plate on the rear panel of the device, see also
IndraControl VEH 30.2 " on page
Bosch Rexroth AG
Maintenance and Installation
Dissolution of the foil surface as well as the
display seal by solvents or by high pressure
cleaning devices!
chapter 12 "Service and
82.
fig. 4-1 "Type plate,
28.
81/109
Advertisement
Table of Contents
