NEC UNIVERGE SV8300 Command Manual page 429

Hide thumbs Also See for UNIVERGE SV8300:

Table of Contents

COMMAND CODE TITLE:

KIND OF SYSTEM COUNTER/PAD DATA

Setting of PAD data from a station/trunk to a

Conference Trunk for a Conference Trunk

Restriction of number of password entries

when Protection Mode is canceled

When entering incorrect password for the number of times set by this command, DT700 Series will be

in password lock state.

Time to lock the DT700 Series when number

of password entries exceeded the limit

When the DT700 Series is in password lock state, a password entry is restricted until the time set by

this command is elapsed.

Volume Control (Side Tone level) of DT300/

DT700 Series

For the volume control (Side tone level) of the Multiline Terminal/DESKCON, set the data by

SYSTEM COUNTER DATA/PAD DATA

SETTING DATA

(1 dB increment)

(1 dB increment)

Not unlocked

[Other than EU]

Continued on next page

NWA-033623-001 Rev.8.1

JUNE/15/2011