Isr (Interactive Status Reporting) - Sony BKPF-R70 Installation Manual

1-11. ISR (Interactive Status Reporting)

1-11. ISR (Interactive Status Reporting)
This board has its own ISR interface function. The following messages are sent to the ISR system,
permitting the operating status of the BKPF-R70 to be monitored without BKPF-500 ISR Interface Board.
The ISR function is controlled by Sony application program software. For the program software, usage,
installation, and operation of a personal computer in which this program software can be used, consult
with your local Sony's sales/service office.
n
BKPF-500 is necessary to monitor the operating status of the power supply units of the interface unit
(PFV series) and the boards except BKPF-R70.
Connection
1. Connect a personal computer to the RS-232C connector (REMOTE 3, D-sub 9-pin) with an
RS-232C cross cable.
2. Install the ISR application program software to the personal computer.
3. Set the personal computer as follows:
Setting Item Setting
Speed 9600 bps
Start Bit 1
Data Bits 7
Parity Bit ODD
Stop Bit 1
4. Set S2-3 on the CPU-256 board to ON.
Status message
Message
BACKUP CPU DOWN
S-BUS LINK DISCONNECTED
1-14 (E)
Description
The backup CPU is shut down.
The S-BUS remote cable has opens.
BKPF-R70