Application Specific Categorization - GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual

Application Specific Categorization

The SVI FF provides another level of configuration, which allows mapping of diagnostic events
to one of the following categories of actions:
Device Failure – You need to take immediate action – the device is failing or may be
failing at any moment.
Device Needs Maintenance Now – You need to schedule maintenance procedure now.
Device Needs Maintenance Soon – You should schedule maintenance procedure.
No Action – You have decided that no action should be taken if this alert condition is
detected.
Figure 91 illustrates the default configuration for the ALERT_ACTION parameter.
You can modify the alert actions related to valve and actuator diagnostic events. As indicated
in Figure 91, the positioner specific alert actions are not configurable – they are hard wired to
the corresponding notification.
The transducer BLOCK_ERR parameter is used to show the mapping results. For the hosts that
do not support Transducer blocks, a special configuration is provided, so that the report is
duplicated in resource BLOCK_ERR parameter. This is done though the Alert Action parameter
configured to map to the Resource block.
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
Figure 91 Configuration for ALERT_ACTION Parameter
Not reported
Warning Data
(Needs
Maintenance Soon)
Device Needs
Maintenance (Now)
Device Failure
Masoneilan SVI FF Instruction Manual
| 241
=