Table of Contents
Advertisement
Risk of fire with overheated food.
Unattended food can overheat and
ignite.
Do not leave the cooktop unattended
whilst it is being used.
Switching on
Push the control knob down and turn
it anti-clockwise to the ignition
symbol . The ignitor will "click" and
ignite the gas.
When a flame is visible, keep the
control knob pressed down for 5–
10 seconds, and then let it go.
If the burner does not ignite or goes
out, turn the control knob back to the
position. Aerate the room or wait for
at least one minute before trying
again. Try keeping the control knob
pressed in for a little longer the next
time.
If the burner does not ignite the
second time, turn the control knob
back to the position and see
"Problem solving guide".
Switching on during a power outage
If there is an interruption to the
electricity supply, the gas can be
ignited manually, e.g. with a match.
Press down the relevant control knob
and turn it anti-clockwise to the large
flame symbol.
Hold the control knob pressed down
and light the gas at the burner with a
match.
Keep the control knob pressed down
for a further 5-10 seconds and then
release it.
Operation
25
Advertisement
Table of Contents
