Siemens SINUMERIK Series Function Manual page 41

03/2012
Function
Display in new diagram
Export diagram
Changing the characteristic
Fig. 2-20: Drop-down list box for circularity test characteristics
The drop-down list box contains the list of characteristics for each test type. If you
select a characteristic, the diagram that has been displayed up to this point will be
replaced by the time series diagram for the characteristic selected.
"Actions" menu
Entries menu
Reload
All parameters
Fig. 2-21: Parameters for all measurement series
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
2.2 Variable monitors – time series – measurements and measurement series
Description
If you click the "Display in new diagram" button on the
right-hand side next to the drop-down list box, a new
diagram of the same type will be displayed below the
diagram that is already shown.
The regenerated diagram assumes all of the display
properties of the original diagram (characteristic se-
lected, markings, display, selection and sequence of
time series, etc.), with the exception of its scale. In a
new diagram, the scale is always set to Auto/Auto.
The data points represented in the diagram are saved
in a file in "XLS" format. If Excel is not available, an
XML file is created.
Regenerates the diagram.
A table containing the parameters for all of the measure-
ment series shown in the diagram is displayed.
2 Machine Information
2-41