Tmcas (For Selected Countries Only) - Siemens HiPath 3000 Series Service Documentation

boards.fm
Boards for HiPath 3000
Peripheral boards
3.3.37

TMCAS (for selected countries only)

NOTE
>
Danger of damage to property due to surge voltage. The required lightning protec-
tion measures must be taken for this board, see Section 2.1.2, "Lightning Protec-
tion".
Introduction
For V1.0 and later, TMCAS (Trunk Module Channel Associated Signaling) boards can be used
in HiPath 3550 to support the country-specific CAS protocol.
The board converts the Euro-ISDN protocol on an S
naling (CAS) protocol. The board functions only in connection with a TS2N (HiPath 3550).
There is no direct connection between the TMCAS board and the system's central control unit.
The TMS2/TS2N handles all signaling and data traffic.
3-294
Nur für den internen Gebrauch
link into the Channel Associated Sig-
2M
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation