Sony RM-AV3000 Operating Instructions (primary manual) Operating Instructions Manual page 70

Setting the Timer (continued)
To clear all timer settings
programmed for all PROG (1 - 12)
Label keys
1
Proceed Steps 1 - 3 on page 69.
2
While pressing the DEL key, press
the TIMER key.
3
Press the YES key.
"REALLY?" stays lit, and "YES" and
"NO" flash.
If you press the NO key
The display returns to Step 1.
70
4
Press the YES key.
If you press the NO key
The display returns to Step 1.
During erasing, "c c c c" stays lit.
When all timer settings programmed
for all PROG (1 - 12) Label keys are
erased, "OK" is displayed with a beep
sound.
5
Press COMMANDER OFF.
COMMANDER
OFF
If you hold COMMANDER OFF
pressed for more than 2 seconds
The Commander turns off.
If you hold COMMANDER OFF
pressed for less than 2 seconds
The Commander returns to the
previous setting mode.