Ys-S6 - Sony CCTV Systems Catalog

SWITCHERS
6-channel Sequential Switcher

YS-S6

•Compact-size sequential switcher for small surveillance
systems
•Six VIDEO INPUTs with loop-through capability
•The pictures from up to six video cameras can be monitored
sequentially on a monitor via the SELECT VIDEO OUT
•The use of DWELL dial enables various dwell time
(displayed time) settings per each monitor from 1
second to 30 seconds
•Both Auto/Manual switching modes are available
Auto: Pressing the AUTO button provides automatic
sequential monitoring of all camera inputs
Manual:The INPUT SELECT buttons allow users
manually select a specific camera input and
view it continuously
•Pictures from connected camera which don't have to
be monitored can be skipped by the use of SKIP
buttons 1 through 6
•Accepts also NTSC/EIA signal
Supplied Accessory
Operation manual (1)
YS-S6 Typical System
Video Camera 1
Video Camera 2
Video Camera 3
Video Camera 4
Video Camera 5
Video Camera 6
44
Specifications
YS-S6
General
Power requirements:
Power consumption:
Operating temperature:
Storage temperature:
Mass:
Input signals
VIDEO INPUT 1 to 6:
DC IN:
Output signals
VIDEO OUTPUT 1 to 6:
SELECT VIDEO OUT:
Dimensions:
NOTE: AC Adaptor is an option.
Rear Panel
Video IN
1 to 6
YS-S6
DC INPUT
SELECT
VIDEO OUT
VIDEO OUT 1 to 6
Video Monitor
DC 9 V
Approx. 2.3 W
0˚C to 40˚C (32˚F to 104˚F)
-20˚C to 60˚C (-4˚F to 140˚F)
Approx. 2.1 kg (4 lb 10 oz)
BNC type, 1.0 Vp-p, 75 Ω, unbalanced,
sync negative
DC jack type
DC 9 V (DC 7 V to 15 V is allowed)
BNC type, loop-through output of VIDEO
INPUT, 75 Ω termination ON/OFF switchable
BNC type, 1.0 Vp-p, 75 Ω, unbalanced,
sync negative
220 (8 3 / )
4
162 (6 1 / )
2
AC Adaptor
Time Lapse VCR
Unit: mm (inches)
Video Monitor