Table of Contents
Advertisement
Making a Wired
Connection with a
Computer
(VPL-DX15 Only)
When you make a wired connection between
the projector and a computer, there are two
methods; peer-to-peer connection and wired
LAN connection.
1
Connect the
connector on the projector to the
network connector on a computer or
on a LAN using an Ethernet cable (not
supplied).
Peer-to-peer connection
to
(network/
RJ45) connector
to network
connector
Note
When a peer-to-peer connection is made, set a
private IP Address (e.g. 192.168.0.1) for each
of the projector and computer.
14
Making a Wired Connection with a Computer
(network/RJ45)
Projector
Ethernet cable (cross
cable) (not supplied)
Computer
Wired LAN connection
to
(network/
RJ45) connector
LAN
Hub or router
If the DHCP server is enabled on the
connected LAN, the IP Address is
assigned automatically.
2
Press the NETWORK key on the
remote commander.
The following menu appears:
®
Windows Vista
Network Projector
Network Name (SSID):
Projector Name:
SonyProj99808B8
Network Address:
192.168.0.1
Projector Password:
Search for a projector or enter the "Network
address" and "Projector password" at
"Connect to a Network Projector" of
®
Windows Vista
.
If the assigned IP Address is displayed
under "Network Address", the
connection is complete.
When the IP Address is not
assigned automatically
The following menu appears.
We recommend that you use the "Simple
Setting" wizard for network configuration.
Projector
Ethernet cable
(straight cable)
(not supplied)
Detail Information
Switch
Select:
Set:
Advertisement
Table of Contents
