Before Calling Service Personnel - Sony DPS5032N Operating Instructions Manual

Before Calling Service Personnel

Check the following guide for the possible cause of a problem before contacting service.
Symptom
• The power cord is disconnected.
No power.
• Hold switch is set to HOLD position.
• The battery is discharged.
The power is on, but • No disc is inserted.
the DVD player does
not work.
No picture on the • The video cable is not connected
LCD or TV (including securely.
video from another
• The AV LINE SELECT switch is not set
unit).
correctly.
• LCD mode is set to OFF.
• Check that Brightness control is set to "–".
• The TV is not set to receive DVD signal
output.
• The connected TV power is turned off.
Symptoms and Correction
Cause
• Plug the power cord into the wall out-
let securely.
• Release the hold mode.
• Recharge the battery.
• Insert a disc. (Check that the DVD or,
audio CD indicator in the display win-
dow is lit.)
• Connect the video cable into the jacks
securely.
• Set the LINE SELECT switch correct-
ly.
- While you are playing a disc, set the
LINE SELECT switch to Out mode.
- While you are viewing video from
other equipment, set the LINE
SELECT switch to In mode.
• Select a LCD mode other than OFF.
• Adjust the brightness.
• Select the appropriate video input
mode on the TV so the picture from
the DVD player appears on the LCD
screen.
• Turn on the TV.
64
Correction