Specifications - Sony UP-D897 Instructions For Use Manual

3
Clean the platen roller gently with a damp clothe
soaked in water and a mild detergent.
Notes
• After the surface of the platen roller wiped has
been dried completely, turn the platen roller to
clean another portion.
• Do not turn the platen roller with hands. Use the
FEED button to turn it. To clean another part of
the surface of the platen roller, go to the next step.
4
Press and hold down the FEED button so that the
platen roller turns automatically. Release the FEED
button when the surface of the platen roller to be
cleaned appears.
Be careful so that you have your fingers caught
in the turning platen roller.
Notes
• The platen roller is turning while you are pressing
the FEED button. Be careful so that you have
your fingers caught in the turning platen roller.
• Be sure to start cleaning only after the platen
roller has stopped completely.
5
Repeat steps 3 and 4 until the platen roller becomes
clean.
6
After the platen roller has been dried completely,
close the door by pushing it.
18

Specifications

Platen roller
Specifications
Power requirement
100 to 240 V AC, 50/60 Hz
Input current 1.5 A to 0.8 A
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
20 % to 80 %
Storage and transport temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage and transport humidity
20 % to 90 %
154 × 88 × 240 mm (w/h/d)
Dimensions
(6 1/6 × 3 1/2 × 9 1/2 inches)
Mass 2.6 kg (5 lb 11 oz) (printer only)
Thermal head Thin-film thermal head, 1280 dots
Gradation 256-level gradation (8-bit)
Memory capacity
4096 × 1280 × 8 (bit)
320 × 100 mm (max.)
Picture size
Printing speed About 2 sec./image (960 × 1280 dots)
(printing at the high speed)
About 3.3 sec./image (960 ×
1280 dots) (printing at the normal
speed)
Picture elements
4096 × 1280 dots (max.)
Dot density H: 100 mm/1280 dots = 0.078
V: 100 mm/1280 dots = 0.078
Square dots
Interface Hi-Speed USB (USB 2.0)
Accessories provided
Thermal head cleaning sheet (1)
CD-ROM (including multi-lingual
operating instructions, Readme and
printer driver) (1)
Media label (1)
USB cable 1-824-211-41 (SONY) (1)
Before Using this Printer (1)
Service Contact List (1)
Software License (1)