Sony PEG-NX60 Intellisync Lite Operating Instructions Manual page 35

"Memory Stick" Slot
b
For details, refer to "Using "Memory Stick" media" in "Handbook."
Inserting a "Memory Stick" media
Notes
• Insert "Memory Stick" media in the right direction. If "Memory Stick" media is
forcibly inserted in the wrong direction, the "Memory Stick" slot may be damaged.
• Do not insert a "Memory Stick" media other than the "Memory Stick" slot.
Removing a "Memory Stick" media
Push the "Memory Stick" media in
Note
Make sure that your CLIÉ handheld is not writing to or reading data from a "Memory
Stick" media (the "Memory Stick" LED is not blinking) before removing it.
If you remove a "Memory Stick" media while the "Memory Stick" LED is blinking,
recorded data may be deleted or damaged.
Insert a "Memory Stick" media into
this slot.
The "Memory Stick" LED blinks in
orange while your CLIÉ handheld is
writing data to or reading data from a
"Memory Stick" media.
"Memory Stick" LED
The "Memory Stick" LED blinks in orange
while your CLIÉ handheld is writing to or
reading data from a "Memory Stick" media.
b
Pull the "Memory Stick" media out
35