Step 2: Insert A Battery - Sony AZ-HS1 Operating Instructions Manual

Portable usb memory player
Table of Contents

Advertisement

Step 2: Insert a battery

The battery compartment is provided on the left ear side.
Insert one LR03 (size AAA) alkaline battery into the battery compartment as illustrated below.
Push and slide the F part.
Battery duration
Approximately 11 hours (continuous playback, with a Sony LR03 (size AAA) alkaline battery)
When the battery is drained, playback stops and the power is turned off automatically.
Operations of the buttons and switches may also become disabled. Even if you try to turn on the
power in this state, the LED indicator will not flash and you cannot start playback.
Replace the battery with a new one.
When you turn on the power after replacing the battery, playback starts from the track whose
playback was interrupted by battery drain.
To remove the battery
Remove the battery as illustrated below.
Push and slide the F part.
Notes on dry batteries
• Do not throw batteries into fire.
• Do not carry batteries with coins or other metallic objects. It can generate heat if the positive
and negative terminals of the battery are accidentally contacted by a metallic object.
• When the player is not to be used for a long time, remove the battery.
• If battery leakage occurs, wipe off any deposit in the battery compartment, and insert a new
battery. In case the deposit adheres to you, wash it off thoroughly.
Insert the E
end first
e
E
e
E
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hs128Hs256Az-hs128Az-hs256

Table of Contents