Starting The Playback Quickly (Quick Mode); Selecting The Disc Mode (Disc Mode) - Sony WALKMAN MZ-NH1 Operating Instructions Manual

Starting the playback
quickly (Quick Mode)
The recorder is factory set to quickly start
playback after the playback button is
pressed.
You can check the setting as follows.
1
While the recorder is stopped or
playing, enter the menu and select
"Option" - "Quick Mode".
2
Turn the jog dial until "Quick On"
appears in the display, and then press
the dial to enter the selection.
If you will not use the recorder
for a long time
Select "Quick Off" in step 2.
You can minimize battery drain while the
recorder is not being used.
Note
When the quick mode is set to "Quick On", the
power remains on within the recorder even
when nothing appears in the display. When the
rechargeable battery becomes completely
drained, the internal power supply of the
recorder turns off automatically.
Jog dial
On the recorder
5-way control key
(NENT, FR, FF)
1
Enter the menu and select "Option" -
"QuickMode".
2
Press the 5-way control key towards
FR or FF until "Quick On" appears in
the display, and then press the control
key to enter the selection.
Selecting the disc
mode (Disc Mode)
When you insert a 60/74/80-minute
standard disc (blank) into the recorder,
you can use this function to specify use of
the disc in Hi-MD mode or MD mode.
If you want to use the disc recorded on
this unit on another component that does
not support Hi-MD, record the disc with
"Disc Mode" in the menu set to "MD".
1
Enter the menu and select "Option" -
"Disc Mode".
2
Turn the jog dial until "Hi-MD"
(factory setting) or "MD" appears in
the display, and then press the dial to
enter the selection.
MENU
Jog dial
69