Menu Bar - Siemens SIREC D200 Manual

Display recorders
Hide thumbs Also See for SIREC D200:
Table of Contents

Advertisement

Menu Bar

At the top of each process screen is the Menu bar.
Menu
This gives direct access to the Menu System to set up the recorder.
corder Setup" on page 43
Alarm bell (1)
The second button shows the Alarm status. When the alarm bell is green this means there
are no active alarms. If the bell is red then an alarm is active and the number of active alarms
will display below.
Press this button to produce the Alarm menu bar. Here there is an Acknowledge button to
confirm any latched alarms that require acknowledgment.
page 66
tail button will take you straight to the Alarms menu, see
Time Left (18h)
This button shows how much time is left before data will fill the internal memory and an ex-
port of the memory to an external device is required, before data is overwritten. Select this
button to go to the Recording screen to export the data now or set up a timed export using
the Scheduled option.
List (78)
This button produces another button bar for quick access to Batch Controls, Mark on Chart
or Message details. The number displayed is the number of new messages that have been
registered since the menu was last checked.
Select this to produce another button bar with access to:
156
There is a View button that displays all pens currently with alarms set up. The De-
See "Recording Menu" on page 120
If the Time Left button shows two green arrows this means that the memory
buffer is full and the oldest data has started to be over-written.
• Batch - Shortcut to enter details to start a new batch or to control a batch that has already
See "Batch Setup/Batch Control" on page 117
been started.
• Mark on Chart - Select the Mark button to enter a Mark on Chart. Embedded process val-
ues can be entered which will display pen information on the marker.
Process Values" on page 85.
• Message Detail - Press this button for quick access to the Messages screen, where each
message is put into a category or All Messages can be viewed.
on page 122
Recorder ID and Name
alternates with the
Screen Name.
Date and Time
See "Section 4: Re-
See "Alarms Menu" on
"Alarms Menu" on page 112
See "Embedded
See "Messages Menu"
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sirec d300Sirec d400

Table of Contents