Table of Contents
Troubleshooting
Related Manuals for Sony RDR-HXD1070
Summary of Contents for Sony RDR-HXD1070
-
Page 1: Dvd Recorder
DVD Recorder Operating Instructions To find out useful hints, tips and information about Sony products and services please visit: www.sony-europe.com/myproduct RDR-HXD770/HXD870/HXD970/HXD1070 © 2007 Sony Corporation 3-113-760-12(1) -
Page 2: Warning
Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. Precautions • This unit operates on 220 – 240 V AC, 50/60 Hz. Check that the unit’s operating voltage is... -
Page 3: Precautions
Sony. • If the hard disk needs to be formatted or replaced, it will be done at the discretion of Sony. All contents of the hard disk drive will be erased, including contents that violate copyright laws. On power sources •... - Page 4 On recording Make trial recordings before making the actual recording. On compensation for lost recordings Sony is not liable and will not compensate for any lost recordings or relevant losses, including when recordings are not made due to reasons including recorder failure, or...
-
Page 5: Table Of Contents
Controlling TVs with the remote ....... 24 If you have a Sony DVD player or more than one Sony DVD recorder . - Page 6 Recording from Connected Equipment ......61 — Getting to Know Your DVD Recorder...
- Page 7 GUIDE Plus+ (For analogue broadcasting only) ... .63 Introduction to the GUIDE Plus+ System ......63 Learning the common elements .
- Page 8 Erasing and Editing a Chapter ........95 Dividing a chapter (Divide) .
- Page 9 Using the “Photo Album” List ........122 Viewing a JPEG image file .
-
Page 10: Quick Guide To Disc Types
Quick Guide to Disc Types Recordable and playable discs Type Disc Logo mode Hard disk drive (internal) Video mode DVD+RW mode DVD-RW Video mode DVD+R DVD+R DL DVD-R mode DVD-R Video mode Icon used Formatting in this (new discs) manual Select “Video Mode Off”... - Page 11 Usable disc versions (as of April 2007) • 8x-speed or slower DVD+RWs • 6x-speed or slower DVD-RWs (Ver.1.1, Ver.1.2 with CPRM • 16x-speed or slower DVD+Rs • 16x-speed or slower DVD-Rs (Ver.2.0, Ver.2.1 with CPRM • 8x-speed or slower DVD+R DL (Double Layer) discs •...
-
Page 12: Playable Discs
Playable discs Type DVD VIDEO VIDEO CD DATA DVD DATA CD “DVD VIDEO” and “CD” are trademarks. DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license. ® DivX is a video file compression technology, developed by DivX, Inc. - Page 13 Note on playback operations of DVD VIDEOs/VIDEO CDs Some playback operations of DVD VIDEOs/ VIDEO CDs may be intentionally set by software producers. Since this recorder plays DVD VIDEOs/VIDEO CDs according to the disc contents the software producers designed, some playback features may not be available.
-
Page 14: Hookups And Settings
Hookups and Settings Hooking Up the Recorder Follow steps 1 through 6 to hook up and adjust the settings of the recorder. Do not connect the mains lead until you reach “Step 4: Connecting the Mains Lead” on page 23. Notes •... -
Page 15: Step 1: Connecting The Aerial Cable And Set Top Box Controller
Step 1: Connecting the Aerial Cable and Set Top Box Controller If the set top box receiver can output RGB signals This recorder accepts RGB signals. If the set top box receiver can output RGB signals, connect the TV SCART connector on the set top box receiver to the LINE 1/DECODER jack, and set “LINE 1 In”... -
Page 16: A: Receiving Freeview (For Digital Broadcasting)
Aerial cable (supplied) to ANALOG AERIAL IN Aerial cable (not supplied) to ANALOG AERIAL OUT : Signal flow to aerial input Aerial cable (supplied) to DIGITAL AERIAL OUT Wall to DIGITAL AERIAL IN DVD recorder Wall to DIGITAL AERIAL IN DVD recorder... -
Page 17: B: Receiving Cable Or Satellite (For Analogue Broadcasting)
Connect only if your set top box receiver has a SCART connector. Place the set top box controller near the remote sensor on the set top box receiver. Set top box controller (page 15) ANT IN TO TV SCART cord (not supplied) to aerial input to G-LINK DVD recorder ,continued... -
Page 18: C: Receiving Terrestrial (For Analogue Broadcasting)
With this hookup, you can record any programme position by selecting the programme position on the recorder. Wall to ANALOG AERIAL IN DVD recorder to ANALOG AERIAL OUT to aerial input Aerial cable (supplied) : Signal flow... -
Page 19: Step 2: Connecting The Video Cords/Hdmi Cord
SCART cord (not supplied) to T LINE 3 – TV to LINE 2 OUT to HDMI OUT (S VIDEO) S-video cord (not supplied) TV, projector, or audio component DVD recorder HDMI cord (not supplied) TV, projector, or audio component ,continued... - Page 20 Use a certified HDMI cord (not supplied) to enjoy high quality digital picture and sound through the HDMI OUT jack. When connecting a Sony TV that is compatible with the HDMI control function, see page 21. To see the signals from the connected set top...
-
Page 21: About The Smartlink Features (For Scart Connections Only)
About the HDMI Control functions for ‘BRAVIA’ Theatre Sync (for HDMI connections only) By connecting Sony components that are compatible with the HDMI Control function with an HDMI cord (not supplied), operation is simplified as below: • One-Touch Play (page 81) •... -
Page 22: Step 3: Connecting The Audio Cords/Hdmi Cord
HDMI cord (not supplied) to HDMI OUT Audio/video cord (not supplied) If you connect a Sony audio component that is compatible with the HDMI control function, refer to the operating instructions supplied with the audio component. [Speakers] Rear (R) -
Page 23: Step 4: Connecting The Mains Lead
B Audio L/R (left/right) input jacks This connection will use your TV’s or audio component’s two speakers for sound. z Hint For correct speaker location, see the operating instructions supplied with the connected components. Notes • Do not connect your TV’s audio output jacks to the LINE IN (R-AUDIO-L) jacks at the same time. -
Page 24: Step 5: Preparing The Remote
Notes • If the supplied remote interferes with your other Sony DVD recorder or player, change the command mode number for this recorder (page 25). • Use the batteries correctly to avoid possible leakage and corrosion. -
Page 25: Recorder
Sony DVD recorder If the supplied remote interferes with your other Sony DVD recorder or player, set the command mode number for this recorder and the supplied remote to one that differs from the other Sony DVD recorder or player after you have completed “Step 6: Easy Setup.”... -
Page 26: Changing Programme Positions Of The Recorder Using The Remote
Changing programme positions of the recorder using the remote You can change programme positions of the recorder using the number buttons. Number buttons Example: for channel 50 Press “5,” “0,” then press ENTER. z Hint If the aerial cables are connected to both DIGITAL AERIAL IN and ANALOG AERIAL IN jacks, you can switch between digital mode and analogue mode using the INPUT button. - Page 27 D.TV Auto Channel Setting If the aerial cable is connected to the DIGITAL AERIAL IN jack (hookup A), select “Auto Scan.” Then, select your country/region using </,, and press ENTER. The recorder will automatically capture and store the available TV and Radio channels.
-
Page 28: Setting Up Your Set Top Box Receiver For The Guide Plus+ System (For Analogue Broadcasting)
Select “Guide (Digital)” to use the digital electronic programme guide (see “Guide to Digital Services (For Freeview users only)” on page 48). Select “Guide (Digital)” if you receive only digital broadcasts. Select “GUIDE Plus+” to use the Gemstar GUIDE Plus+ electronic programme guide (see “GUIDE Plus+ (For analogue broadcasting only)”... - Page 29 Select the receiver brand using M/m, and press ENTER. If you select “Other providers,” you can select a receiver brand from a list of all available brands. If your receiver brand is not on the list, select “???.” The receiver brand list is automatically updated, so your receiver may be available at a later date.
- Page 30 To change the basic GUIDE Plus+ settings Press GUIDE. The GUIDE Plus+ system “Home Screen” appears. Select “Setup” in the Menu Bar using M/ ,, and press ENTER. The GUIDE Plus+ setup menu appears. Select “Basic Setup” using M/m, and press ENTER.
-
Page 31: Connecting A Vcr Or Similar Device
“Power Save” to “Off” (default) in the “Basic” setup (page 130). • When you record to a VCR from this DVD recorder, do not switch the input source to TV by pressing the TV/DVD button on the remote. -
Page 32: Connecting To The Line 2 In Jacks On The Front Panel
This may cause noise (feedback). • Do not connect more than one type of video cord between the recorder and your TV at the same time. OUTPUT VIDEO AUDIO S VIDEO Audio/video cord (not supplied) VCR, etc. DVD recorder... -
Page 33: Connecting An External Decoder
AERIAL IN Aerial cable (supplied) to T LINE 3 – TV to AERIAL OUT to SCART input SCART cord (not supplied) to i LINE 1/DECODER External decoder (PAY-TV/ Canal Plus analogue decoder) SCART cord (not supplied) DVD recorder ,continued... -
Page 34: Setting External Decoder (Pay-Tv/Canal Plus Analogue Decoder) Programme Positions
Setting external decoder (PAY- TV/Canal Plus analogue decoder) programme positions To watch or record PAY-TV/Canal Plus analogue programmes, set your recorder to receive the programme positions using the on-screen display. In order to set the programme positions correctly, be sure to follow all of the steps below. - Page 35 Select “Next Screen,” and press ENTER. Select your country/region, and press ENTER. Programme position Select the desired programme position using ./> or number buttons. Select “Channel” using M/m. Select the external decoder programme position using </,. Select “Sound System” using M/m. Press </, to select an available TV system, B/G, D/K, I, or L.
-
Page 36: Inserting A Disc
Eight Basic Operations — Getting to Know Your DVD Recorder 1. Inserting a Disc - RW - RW Video Video DATA CD Z (open/ close) Press DVD. Press Z (open/close), and place a disc on the disc tray. Recording/playing side facing down Press Z (open/close) to close the disc tray. -
Page 37: Checking The Disc Status While Recording
Press REC MODE repeatedly to select the recording mode. Each time you press the button, the display on the TV screen changes as follows: * Available when “Manual Rec. Mode” is set to “On (go to setup)” in the “Recording” setup (page 141). -
Page 38: Playing The Recorded Programme (Title List)
3. Playing the Recorded Programme (Title List) - RW Video To play a recorded title, select the title from the Title List. EXIT/ O RETURN PLAY MODE Press HDD or DVD. If you select DVD, insert a DVD (see “1. Inserting a Disc”... - Page 39 E Title information: Displays the title number, title thumbnail picture (playback picture for the selected title, still images for the other titles), recording date, recorded station name (or programme position number), recording mode, title name, and title size. “Recording”: Indicates that the title is currently being recorded.
-
Page 40: Displaying The Playing Time And Play Information
Select “Edit” using M/m, and press ENTER. Select “Set Thumbnail” using M/m, and press ENTER. The display for setting the thumbnail point appears and the title starts to play. While watching the playback picture, press H, X or c to select the scene you want to set for a thumbnail picture, and press X. -
Page 41: Disc Information
During playback Example: DVD-R in Video mode A Playing status B Shows that the Resume Play is available (page 81). C Current selected recording mode (remaining DVD recording time/disc type) (page 71) D Remaining time E Station name and programme position number F Audio setting for the current programme... -
Page 42: Changing The Name Of A Recorded Programme
5. Changing the Name of a Recorded Programme - RW Video You can label a DVD, title, or programme by entering characters. You can enter up to 64 characters for a title recorded in the HDD/ DVD-RW/DVD-R (VR mode), 40 characters for a title recorded in the DVD+RW/DVD- RW (Video mode)/DVD+R/DVD-R (Video mode), but the actual number of characters... -
Page 43: Labelling And Protecting A Disc
Press x (or select “OK,” and press ENTER). To cancel the setting, press O RETURN. To use the number buttons You can also use the number buttons to enter characters. Refer to the number next to each row of letters on your TV screen. In step 7 above, press a number button repeatedly to select a character. -
Page 44: Protecting A Disc
Select “Basic,” and press ENTER. Select “Input Disc Name,” and press ENTER. Select “Next Screen,” and press ENTER. Enter the disc name (page 42). Note You can enter up to 64 characters for a DVD-RW/ DVD-R (VR mode) disc name, and 40 characters for a DVD+RW/DVD-RW (Video mode)/DVD+R/ DVD-R (Video mode) disc name. -
Page 45: Playing The Disc On Other Dvd Equipment (Finalise)
7. Playing the Disc on Other DVD Equipment (Finalise) - RW - RW Video Video Finalising is necessary when you play discs recorded with this recorder on other DVD equipment. When you finalise a DVD+RW, DVD-RW (Video mode), DVD+R, or DVD-R (Video mode), a DVD menu will be automatically created, which can be displayed on other DVD equipment. -
Page 46: Unfinalising A Disc
Select “Next Screen,” and press ENTER. For DVD-RW/DVD-R (VR mode), the recorder starts finalising the disc. Go to step 9. (DVD+RW/DVD-RW (Video mode)/ DVD+R/DVD-R (Video mode) only) Select a title menu style, and press ENTER. The menu appears in the selected title menu style when the “top menu”... -
Page 47: Reformatting A Disc
8. Reformatting a Disc - RW - RW Video New discs are automatically formatted when inserted. If necessary, you can manually re- format a DVD+RW, DVD-RW, or DVD-R disc to make a blank disc. For DVD-RWs or DVD-Rs, you can select a recording format (VR mode or Video mode) according to your needs. -
Page 48: Guide To Digital Services (For Freeview Users Only)
Guide to Digital Services (For Freeview users only) EPG (Electronic Programme Guide) The Electronic Programme Guide is a guide showing the television programme schedule for a day or more at a time on your television (via the Digital Terrestrial Television tuner included in this recorder). -
Page 49: Programme Information
z Hint You can display the channel list by pressing the ENTER button while watching a programme. To watch another channel, select a channel using </ M/m/,, and press ENTER. Available buttons in the programme list Buttons Operations PAGE +/– Display the previous/next eight channels. -
Page 50: Viewing A Digital Text Service
Available buttons in the Information display Buttons Operations Toggle the display between description of the current/ next programme </, Display programme information for other channels ENTER View the selected channel INFO Display the detailed programme information Viewing a Digital Text Service Many digital TV channels broadcast information via their text service. -
Page 51: Selecting Digital Text From Other Channels
Once the text page is displayed (this may take some time), follow the on- screen instructions to obtain your required selection. On some pages the TV programme may also be displayed on the text screen. On- screen instructions will inform you how to change the displayed programme. -
Page 52: Timer Recording (For Freeview Users Only)
Timer Recording (For Freeview users only) Before Recording Before you start recording… • Check that the disc has enough available space for the recording (page 40). For the HDD, DVD+RWs, and DVD-RWs, you can free up disc space by erasing titles (page 92). -
Page 53: Unrecordable Pictures
Notes • The maximum continuous recording time to the HDD is 12 hours for a single title. A title longer than 12 hours is divided. • Situations below may cause slight inaccuracies with the recording time. – Recording a programme with poor reception, or a programme or video source of low picture quality. - Page 54 Press TIMER. The “Timer List” display appears. Select the “New Input” row, and press ENTER. Select an item using </, and adjust using M/m. Then press ENTER. The adjustable items are listed below. “Pr/CH”: Sets the programme position and the source. “Date”: Sets the date (up to 30 days later).
-
Page 55: Recording Tv Programmes Using The Epg
Rec. Mode Adjust If there is not enough available disc space for the recording, the recorder automatically adjusts the recording mode to enable the entire programme to be recorded. Set “Rec. Mode Adjust” to “On” in the “Recording” setup (page 143). If the timer settings overlap The confirmation screen appears. - Page 56 Press the red button. The date, start and stop times, programme position, recording mode, etc., settings appear. • If you want to change the setting, press </, to select the item and press M/m to change the setting (page 54). “EPG Link”...
-
Page 57: Recording Programmes Using Series Recording
Recording programmes using Series Recording Series Recording is a feature which uses information from the Electronic Programme Guide. Notes • This function cannot be used when the broadcaster does not include series information with the programme data. • Whether or not a programme is in a series is determined by the broadcaster. -
Page 58: Using The Quick Timer Function
EPG Link Automatically update the date, start and stop times settings when changing the Electronic Programme Guide. Set “EPG Link” to “On” in step 5 of “Series Recording” on page 57. Recording Split Programmes Movies and other programmes that are split into 2 or more parts are called Split Programmes. -
Page 59: Adjusting The Recording Picture Quality
Adjusting the recording picture quality You can adjust the picture quality of digitally broadcasts programmes by selecting a preset setting. You can also adjust the picture quality by changing detailed settings, and store up to three settings in the memory. Note Only progressive video signals for recording can be adjusted. -
Page 60: Checking/Changing/Cancelling Timer Settings (Timer List)
Checking/Changing/ Cancelling Timer Settings (Timer List) - RW Video You can check, change, or cancel the timer settings using the Timer List. Note You cannot change the timer settings with “EPG Link” set to “On.” TIMER Press TIMER. The “Timer List” display appears. Timer information displays the recording date, time, recording mode, etc. -
Page 61: Recording From Connected Equipment
z Hints • For manual timer settings, you cannot modify the timer setting for the current recording, but you can extend the duration of the recording time while recording (page 56). For timer settings using the EPG, you can modify the timer setting for the current recording while recording, and extend the duration of the recording (only when “EPG Link”... - Page 62 Select the desired audio signal when recording a bilingual programme to the HDD or DVD-RWs/DVD-Rs (Video mode). Set “External Audio” to “Bilingual” and “Bilingual Recording” to “A/L” or “B/R” in the “Audio In” setup (page 138). Press REC MODE repeatedly to select the recording mode.
-
Page 63: Guide Plus+ (For Analogue Broadcasting Only)
GUIDE Plus+ (For analogue broadcasting only) Introduction to the GUIDE Plus+ System ® The GUIDE Plus+ system is a free interactive programme guide. It displays up to seven days of programme listings, including programme titles, promotions, and broadcast information. GUIDE Plus+ data for the television programme listings are carried by your local broadcast host channel and are received through your aerial, set top box... -
Page 64: Troubleshooting Guide
“Info”: Shows information when available. “Editor”: Allows you to edit the channel lineup and channel display (page 69). “Setup”: Allows you to change the language, country/region, postal code, input source, or host channel. E “Home” position: When you press the blue button (“Home”), the cursor returns to the last programme position on the “Grid.”... -
Page 65: Watching Tv Using The Guide Plus+ System
Watching TV Using the GUIDE Plus+ System PAGE – DAY – Press GUIDE. The GUIDE Plus+ system “Home Screen” appears. Select a programme using </M/m/ ,, and press ENTER. The GUIDE Plus+ system disappears and the programme position changes to the selected programme. -
Page 66: Searching For A Programme Using The Guide Plus+ System
To unlock the Video Window The Video Window is locked so that it does not change programme positions when you move the cursor across other titles. From “Grid,” select the logo of the programme position that is locked, and press the red button (“Unlock”). -
Page 67: Listing Up Your Favourite Programme Information (My Tv)
Select a programme using M/m, and press ENTER. To enter a new keyword Select “Search” in the Menu Bar, and press ENTER. Select “My Choice” using </,. Press the yellow button (“Add”). The display for entering characters appears. Select a character on the keyboard using </M/m/,, and press ENTER. -
Page 68: Selecting And Watching A Programme From My Tv
Select “Channels,” “Categories,” or “Keywords,” and press the yellow button (“Add”). “Channels”: Select the programme position using </M/m/,, and press ENTER. To add more programme positions, press the yellow button (“Add”). You can register up to 16 programme positions. To cancel the registration, select a programme position, and press the red button (“Delete”). -
Page 69: Changing The Guide Plus+ Host Channel Manually
Wait for one day until the programme guide data can be received. If the programme guide data has not been received after waiting for a day, search for the host channel at the following website and set the host channel manually (“Changing the GUIDE Plus+ host channel manually”... -
Page 70: Disabling Programme Positions
Select the programme position you want to check using M/m. To change the input source, press the red button (“Source”). To change the programme position, press the green button (“Prog. No.”), then enter a programme position number using the number buttons, and press ENTER. Note To receive from the recorder a programme position that can be received by either the set top box... -
Page 71: Timer Recording (For Analogue Broadcasting Only)
Timer Recording (For analogue broadcasting only) Before Recording Before you start recording… • Check that the disc has enough available space for the recording (page 40). For the HDD, DVD+RWs, and DVD-RWs, you can free up disc space by erasing titles (page 92). -
Page 72: Recording Stereo And Bilingual Programmes
Notes • The maximum continuous recording time to the HDD is 12 hours for a single title. A title longer than 12 hours is divided. • Situations below may cause slight inaccuracies with the recording time. – Recording a programme with poor reception, or a programme or video source of low picture quality. -
Page 73: Timer Recording (Guide Plus+/Manual)
Timer Recording (GUIDE Plus+/Manual) - RW - RW Video Video There are two methods to set the timer within the GUIDE Plus+ system: One Button Recording and setting the timer manually. You can set the timer for a total of 32 programmes (8 programmes when using the VPS/PDC function), up to 30 days in advance. -
Page 74: Setting The Timer Manually
Rec. Mode Adjust If there is not enough available disc space for the recording, the recorder automatically adjusts the recording mode to enable the entire programme to be recorded. Set “Rec. Mode Adjust” to “On” in the “Recording” setup (page 143). If the timer settings overlap If one or more timer settings overlap, a message appears. -
Page 75: Using The Quick Timer Function
Select the input source using M/m, and select the programme position using the number buttons or M/m. You can also select the programme position using the yellow button (“Channels”). Press the green button (“Next”). The display for entering characters appears. To change the title name, select a character on the keyboard using </M/ m/,, and press ENTER. -
Page 76: Adjusting The Recording Picture Quality
Adjusting the recording picture quality You can adjust the picture quality by selecting a preset setting. You can also adjust the picture quality by changing detailed settings, and store up to three settings in the memory. SYSTEM MENU Press SYSTEM MENU in stop mode. The System Menu appears. -
Page 77: Creating Chapters In A Title
“Black Level”: Selects the black level (setup level) for the NTSC video signals. Select “ON” to raise the standard black level. Select this when the picture appears too dark. Select “OFF” to set the black level of the input signals to the standard level. Normally, select this position. -
Page 78: Cancelling Timer Settings
Select the timer setting you want to change using M/m, and press the green button (“Edit”). In the left column, select an item using the red button (“Back”) or the green button (“Next”), and adjust using the number buttons or </M/m/ You can change the date, start time, stop time, programme position, or input source. -
Page 79: Recording From Connected Equipment
Recording from Connected Equipment - RW - RW Video Video You can record from a connected VCR or similar device. To connect a VCR or similar device, see “Connecting a VCR or Similar Device” on page 31. Use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack). -
Page 80: Playback
Playback Playing the Recorded Programme/DVD - RW Video DATA CD * DivX video file only Number buttons AUDIO SUBTITLE ANGLE SYSTEM MENU PLAY MODE Press HDD or DVD. • If you select DVD, insert a disc (see “1. Inserting a Disc” on page 36). •... - Page 81 To display the registration code for this recorder Select “Registration Code” of “DivX” in the “Options” setup (page 150). To resume playback from the point where you stopped (Resume Play) When you press H again after you stop playback, the recorder resumes playback from the point where you pressed x.
-
Page 82: Playback Options
Playback options To check the position of the buttons below, see the illustration on page 80. Buttons AUDIO - RW DATA DVD DATA CD * DivX video file only SUBTITLE DVD DATA DVD DATA CD * DivX video file only (instant replay/ instant advance) . - Page 83 Buttons (slow, freeze frame) - RW - RW Video Video *1*2 *1*2 DATA DVD DATA CD Playback direction only DivX video file only X (pause) Notes • Angles and subtitles cannot be changed with titles recorded on this recorder. • JPEG image files made with a DVD camcorder can only be played as a slideshow.
-
Page 84: Playing A Specific Portion Repeatedly (A-B Repeat)
Playing a specific portion repeatedly (A-B Repeat) Press PLAY MODE during playback. The “Play Mode” menu appears. Select “A-B Repeat,” and press ENTER. “Set point A” is selected. While monitoring the sound, press ENTER at the starting point (point A) of the portion to be played repeatedly. -
Page 85: Creating Your Own Programme (Programme)
Creating your own programme (Programme) - RW Video Video * finalised disc only You can play the contents of the HDD or a disc in the order you want by arranging the order of the titles/chapters/albums/tracks on the HDD or disc to create your own programme. - Page 86 To check the detailed settings for the selected preset, press DISPLAY. Press SYSTEM MENU to exit. To create your own setting Select “Memory1,” “Memory2,” or “Memory3” in step 3. Select “Detailed Settings,” and press ENTER. The display for adjusting detailed settings appears.
-
Page 87: Pausing A Tv Broadcast (Tv Pause/Pause Live Tv)
Pausing a TV Broadcast (TV Pause/Pause Live TV) You can pause a current TV broadcast, and record it on the HDD, then continue watching the programme at a later time. This is useful when you receive an unexpected phone call or visitor while watching TV. -
Page 88: Playing From The Beginning Of The Programme You Are Recording (Chase Play)
Playing from the Beginning of the Programme You Are Recording (Chase Play) “Chase Play” allows you to view the recorded part of a programme on the HDD while the recording is being made. You do not need to wait until the recording finishes. Press H while recording. -
Page 89: Searching For A Time/Title/Chapter/Track, Etc
Example: Play a DVD while recording to the HDD. While recording, press DVD and insert the DVD into the recorder. Press TITLE LIST to display the DVD Title List. Select the title you want to play, and press ENTER. Playback starts from the selected title. Note You cannot play a DVD, DivX video or VIDEO CD recorded in the NTSC colour system while... - Page 90 The display for entering the number appears. Example: Chapter Search Press the number buttons to select the number of the title, chapter, time code, etc., you want. For example: Time Search To find a scene at 2 hours, 10 minutes, and 20 seconds, enter “21020.”...
-
Page 91: Erasing And Editing
Erasing and Editing Before Editing This recorder offers various edit options for various disc types. Notes • You may lose the edited contents if you remove the disc or a timer recording starts while editing. • DVD discs created by DVD camcorders cannot be edited on this recorder. -
Page 92: Erasing And Editing A Title
To open up disc space To open up disc space on a DVD+RW or DVD-RW (Video mode), erase the title with the largest number in the title list. Largest title number To open up disc space on the HDD or a DVD- RW (VR mode), you can erase any title. -
Page 93: Editing Multiple Titles (Multi-Mode)
• “A-B Erase”: Erases a section of the title (page 93). • “Divide”: Divides a title into two titles (page 94). • “Chapter Edit”: Edits chapters in a title (page 95). • “Set Genre”: Assigns a genre to a title. •... -
Page 94: Dividing A Title (Divide)
Select point A using press • To return to the beginning of the title, press X and then press .. Select “From,” and press ENTER. The position of point A is displayed, and the title re-starts playing. Select point B using press X. -
Page 95: Erasing And Editing A Chapter
Erasing and Editing a Chapter - RW You can edit individual chapters within a title. To edit DVD-RWs/DVD-Rs (VR mode) without changing the original recordings, create a Playlist (page 96). Press TITLE LIST. For DVD-RWs/DVD-Rs in VR mode, switch the Title List (Original or Playlist), if necessary. -
Page 96: Erasing A Chapter (Erase)
Erasing a chapter (Erase) After step 4 of “Erasing and Editing a Chapter,” select “Erase/Move.” Select a chapter using </,, and press ENTER. Select “Erase,” and press ENTER. The display asks for confirmation. Select “Yes,” and press ENTER. The chapter is erased. Combining multiple chapters (Combine) After step 4 of “Erasing and Editing a... -
Page 97: Moving A Playlist Title (Move)
Moving a Playlist title (Move) Press TITLE LIST. Switch to the Playlist (page 92). Select a Playlist title, and press ,. The sub-menu appears. Select “Edit,” and press ENTER. Select “Move,” and press ENTER. Select a new location for the title using M/m, and press ENTER. -
Page 98: Dubbing (Hdd Y Dvd)
Dubbing (HDD y DVD) Before Dubbing - RW Video In this section, “dubbing” refers to “copying a recorded title on the internal hard disk drive (HDD) to another disc, or vice versa.” You can dub a playing title using the HDD/DVD DUB button (see “HDD/DVD Dubbing”... -
Page 99: Hdd/Dvd Dubbing
Dubbing restriction You cannot dub movies and other DVD VIDEOs to the HDD. Also, when dubbing from a DVD to the HDD, scenes that contain a copy protection signal cannot be recorded. Titles containing “Copy-Once” copy protection signals can be moved only from the HDD to a DVD-RW/DVD-R (VR mode)* (after the title is moved, the original title in the HDD is erased). -
Page 100: Dubbing Using Dubbing List
Dubbing Using Dubbing List - RW Video You can select the titles you want to dub using Dubbing List. You can also edit titles before dubbing without changing the original titles. Press SYSTEM MENU. The System Menu appears. Select “Dubbing,” and press ENTER. Select a dubbing direction, and press ENTER. - Page 101 Select “Start Dubbing,” and press ENTER. When you set “Finalise” to “Yes” in step 9, select the title menu style, and press ENTER. The recorder turns off automatically when you do not use the recorder for more than 20 minutes after the dubbing has finished.
- Page 102 To edit titles on the Dubbing List Follow steps 1 to 7 of “Dubbing Using Dubbing List” on page 100. The “Title Edit” display appears. Select a title you want to edit, and press ENTER. The sub-menu appears. Select an option, and press ENTER. The options differ depending on the dubbing direction or disc type.
-
Page 103: Making A Backup Disc (Dvd Backup)
Making a Backup Disc (DVD Backup) - RW Video Video You can dub all of the contents on a finalised DVD+RW/DVD+R or finalised DVD-RW/ DVD-R (Video mode) to another recordable DVD+RW/DVD-RW or unused DVD+R/ DVD-R via the HDD as a backup copy. Note Backup discs of unfinalised discs cannot be made. -
Page 104: Dv Camcorder Dubbing
DVD equipment, finalise the disc (page 45). • Set the recorder and DV camcorder to the same colour system (page 130). Hookups to DV IN i.LINK cable (not supplied) DV output : Signal flow DVD recorder DV camcorder... - Page 105 Press HDD or DVD to select the recording destination. If you select DVD, insert a disc (see “1. Inserting a Disc” on page 36). Insert the source DV/Digital8 format tape into your digital video camera. For the recorder to record or edit, your digital video camera must be set to video playback mode.
-
Page 106: Dubbing An Entire Dv Format Tape (Dv One Touch Dubbing)
Dubbing an Entire DV Format Tape (DV One Touch Dubbing) - RW Video You can record the entire contents of a DV/ Digital8 format tape onto a disc with a single press of the ONE-TOUCH DUB button on the recorder. The recorder controls the digital video camera for the whole process, and completes the recording. -
Page 107: Playing From A Dv Camcorder
z Hint You can turn off the dubbing menu by pressing the DISPLAY button during dubbing. Press the DISPLAY button again to display the dubbing menu. Note You cannot set a scene to be shorter than one second. Playing from a DV Camcorder Connect your DV camcorder to the DV IN jack on the front panel. -
Page 108: Audio Tracks
Audio Tracks Playing Audio Tracks from CD/DVD DATA DVD DATA CD You can play audio tracks on CDs, DATA DVDs (DVD-ROMs/DVD+RWs/DVD+Rs/ DVD-RWs/DVD-Rs/DVD-RAMs), or DATA CDs (CD-ROMs/CD-Rs/CD-RWs). AUDIO PLAY MODE Insert a disc. See “1. Inserting a Disc” on page 36. Press H. -
Page 109: Playing A Specific Portion Repeatedly (A-B Repeat)
Notes on playing DTS sound tracks on a • When playing DTS-encoded CDs, excessive noise will be heard from the LINE 3-TV/LINE 1/ DECODER/LINE 2 OUT (R-AUDIO-L) jacks. To avoid possible damage to the audio system, the user should take proper precautions when the LINE 3-TV/LINE 1/DECODER/LINE 2 OUT (R-AUDIO-L) jacks of the recorder are connected to an amplification system. -
Page 110: Creating Your Own Programme (Programme)
Creating your own programme (Programme) DATA DVD DATA CD You can play the contents of an album or disc in the order you want by arranging the order of the albums/tracks on a disc to create your own programme. You can make a programme of up to 24 steps. -
Page 111: Searching For An Audio Track
Searching for an Audio Track DATA DVD DATA CD You can search a disc by album or track. As albums and tracks are assigned individual numbers, select the album or track by entering its number. Number buttons PLAY MODE Press PLAY MODE during playback. The “Play Mode”... -
Page 112: About Jukebox
MP3 audio tracks or copy to the HDD. Refer to the operating instructions supplied with the USB device before connecting. to USB jack USB device Note Some USB devices may not work with this recorder. </M/m/,, ENTER HDD/DVD DVD recorder... -
Page 113: Copying Audio Tracks (Disc T Hdd)
Copying audio tracks (DISC t HDD) Insert a disc that you are going to copy to the HDD. Press H to start playback. Press HDD/DVD DUB. For CDs, all the tracks on the disc are copied to the HDD. For DATA CDs/ DATA DVDs, the current album is copied to the HDD. -
Page 114: Playing Audio Tracks Using Jukebox/Usb Device
Playing Audio Tracks Using Jukebox/USB Device SUBTITLE ANGLE SYSTEM MENU Press SYSTEM MENU. The System Menu appears. Select “Music Jukebox,” and press ENTER. Select “Listen to Music / Edit” or “Listen to Music from USB Device,” and press ENTER. To listen to the audio tracks on the HDD, select “Listen to Music / Edit.”... -
Page 115: Playback Options
To skip a track (Set Skip) If you want a track not to play, set the track to be skipped. Select a track you want to skip. Press , while the Album List is displayed. Select “Edit” using M/m, and press ENTER. -
Page 116: Creating Your Own Programme (Programme)
Creating your own programme (Programme) You can play the contents of the HDD or connected USB device in the order you want by arranging the order of the tracks on the HDD or connected USB device to create your own programme. You can make a programme of up to 24 steps. -
Page 117: Managing Audio Tracks On The Music Jukebox
Managing Audio Tracks on the Music Jukebox You can erase or label albums/tracks on the HDD. You can also assign an album a genre. SYSTEM MENU Press SYSTEM MENU. The System Menu appears. Select “Music Jukebox,” and press ENTER. Select “Listen to Music / Edit,” and press ENTER. -
Page 118: Jpeg Image Files
USB jack on the recorder. </M/m/,, Press SYSTEM MENU. ENTER The System Menu appears. Select “Photo Album,” and press ENTER. The “Photo Album” menu appears. DVD recorder to USB jack USB cable (not supplied) USB output Digital still camera... -
Page 119: Copying All Jpeg Image Files From The Connected Usb Device (Usb T Dvd-Rw/Dvd-R)
Select the item, and press ENTER. To copy from DATA CDs/DATA DVDs (DVD-RWs/DVD-Rs), select “View Photos on a CD/DVD.” To copy from the connected USB device, select “View Photos on a USB Device.” The “Photo Album” list appears. Example: CD/DVD Select an album or JPEG image file using M/m, and press ,. -
Page 120: Copying Jpeg Image Albums To A Disc (Hdd T Dvd-Rw/Dvd-R)
Press ENTER, and select a JPEG image file using M/m. Press ,. The sub-menu appears. Select an item, and press ENTER. To copy two or more albums or files, select “Multi-Mode.” To copy the selected album, select “Copy Album Contents” in “Album Options,” and go to step 12. -
Page 121: Copying Jpeg Image Files To A Disc (Hdd T Dvd-Rw/Dvd-R)
Select “Yes,” and press ENTER. The selected JPEG image albums are copied in the “PICTURE” folder on the disc. The JPEG image album names are automatically labelled as “***ALBUM.” If you want to play the disc on other DVD equipment, finalise the disc (page 45). -
Page 122: Using The "Photo Album" List
Switch to the JPEG image file list. For instructions, see “To switch between the album list and JPEG image file list” on page 123. Select a JPEG image file using M/m, and press ENTER. z Hints • See “8. Reformatting a Disc” (page 47) to format DVD-RWs/DVD-Rs in Video mode. - Page 123 12-Photo List (Example: HDD) 4-Photo List 1-Photo List A Album name B Album size C Sub-menu: Press , to display the sub-menu. The sub-menu displays options applicable only to the selected item. The displayed options differ depending upon the model, situation, and disc type. D Scroll bar: Appears when all of the JPEG image files do not fit on the list.
-
Page 124: Viewing A Jpeg Image File
To reload the files or folders When a disc or the connected USB device contains 1,000 or more files and/or 100 or more folders, select “Read next” in the “Photo Album” list, and press ENTER to view unloaded files or folders. It may take a few minutes to load files or folders. -
Page 125: Managing Jpeg Image Files On The Hdd
To rotate an image Press ANGLE repeatedly during a slideshow. Each time you press ANGLE, the image turns clockwise by 90°. z Hint You can start a slideshow by selecting “Start Slideshow” from the sub-menu. Managing JPEG Image Files on the HDD SYSTEM MENU Press SYSTEM MENU. -
Page 126: Printing Jpeg Image Files
USB device by connecting a PictBridge- compatible printer to the USB jack on the recorder. Refer to the instructions supplied with the printer. SYSTEM MENU Connect a PictBridge-compatible printer to the USB jack on the recorder. to USB jack PictBridge-compatible printer </M/m/,, ENTER DVD recorder... - Page 127 Connect the USB device to the USB jack on the recorder. When printing JPEG image files on the HDD, skip this step. Press SYSTEM MENU. The System Menu appears. Select “Photo Album,” and press ENTER. The “Photo Album” menu appears. Select the item, and press ENTER.
-
Page 128: Settings And Adjustments
Settings and Adjustments Disc Settings (Disc Setup) The “Disc Setup” setup allows you to adjust DVD related settings. Press SYSTEM MENU while the recorder is in stop mode. Select “Disc Setup,” and press ENTER. The “Disc Setup” setup appears with the following options. -
Page 129: Recorder Settings (Basic)
Recorder Settings (Basic) The “Basic” setup helps you to make clock and other recorder related settings. Press SYSTEM MENU while the recorder is in stop mode. Select “Initial Setup,” and press ENTER. Select “Basic,” and press ENTER. The “Basic” setup appears with the following options. - Page 130 Press M/m to set the day, and press ,. Set the month, year, hour, and minutes in sequence. Press </, to select the item to be set, then press M/m to set the numbers. The day of the week is set automatically.
-
Page 131: Aerial Reception Settings (Digital Tuner)
Aerial Reception Settings (Digital Tuner) The “Digital Tuner” setup helps you to make digital tuner and programme position settings for the recorder. Press SYSTEM MENU while the recorder is in stop mode. Select “Initial Setup,” and press ENTER. Select “Digital Tuner,” and press ENTER. -
Page 132: Channel Options
Channel Options You can skip or lock certain channels. Select “Channel Options” in “Digital Tuner,” and press ENTER. Select “Next Screen,” and press ENTER. Enter your four-digit password using the number buttons, and press ENTER. To set a password, see page 145. Select the programme position you want to skip or lock using M/m, and press ENTER. -
Page 133: Aerial Reception Settings (Analog Tuner)
Aerial Reception Settings (Analog Tuner) The “Analog Tuner” setup helps you to make analogue tuner and programme position settings for the recorder. Press SYSTEM MENU while the recorder is in stop mode. Select “Initial Setup,” and press ENTER. Select “Analog Tuner,” and press ENTER. - Page 134 Skip Select this when the programme position is unused or contains unwanted channels. The selected position will be skipped when you press PROG +/–. Does not skip the selected programme position. CH System Select the region to get the best broadcast reception.
-
Page 135: Channel Swapping
Receivable channels TV system Channel coverage BG (West European E2 – E12 VHF Countries, except Italia A – H VHF those listed below) E21 – E69 UHF S1 – S20 CATV S21 – S41 HYPER S01 – S05 CATV DK (East European R1 –... -
Page 136: Video Settings (Video In/Out)
Video Settings (Video In/ Out) The “Video In/Out” settings will adjust items related to the image, such as size and colour. Select the settings according to the type of TV, tuner, or decoder connected to the DVD recorder. Press SYSTEM MENU while the recorder is in stop mode. -
Page 137: Audio Input Settings (Audio In)
LINE 1 In Selects a method of inputting video signals for the LINE 1/DECODER jack. The picture will not be clear if this setting does not match the type of video input signal. Video Inputs video signals. S-Video Inputs S-video signals. Inputs RGB signals. -
Page 138: Audio Output Settings (Audio Out)
External Audio Stereo Select this when receiving stereo programmes from connected equipment. Bilingual Select this when receiving bilingual programmes from connected equipment. Note When receiving audio input signals from the DV input jack, the recorder automatically selects “Stereo” or “Bilingual” regardless of the “External Audio”... - Page 139 DTS Output (DVD VIDEOs only) Selects whether or not to output DTS signals. Select this when the recorder is connected to an audio component with a built-in DTS decoder. Select this when the recorder is connected to an audio component without a built-in DTS decoder.
-
Page 140: Language Settings (Language)
Language Settings (Language) The “Language” setup allows you to adjust language settings. Press SYSTEM MENU while the recorder is in stop mode. Select “Initial Setup,” and press ENTER. Select “Language,” and press ENTER. The “Language” setup appears with the following options. The default settings are underlined. -
Page 141: Recording Settings (Recording)
Recording Settings (Recording) The “Recording” setup allows you to adjust recording settings. Press SYSTEM MENU while the recorder is in stop mode. Select “Initial Setup,” and press ENTER. Select “Recording,” and press ENTER. The “Recording” setup appears with the following options. The default settings are underlined. - Page 142 Approx. recording time (hours) Recording RDR- RDR- mode HXD770 HXD870 (EP) (SLP) (SEP) The recording time for DVDs Approx. recording time (hours) Recording DVD+RW/ mode DVD-RW/ DVD+R/ DVD-R 1 hr. 1 min. MN32 (HQ) 1 hr. 1 min. MN31 1 hr. 5 min. MN30 1 hr.
- Page 143 Resolution The first figure refers to when “Input Line System” is set to “NTSC”; the second when set to “PAL/SECAM” in the “Basic” setup (page 130). For the HDD (“HDD Recording Format” is set to “Video Mode Off”)/DVD-RW (VR mode)/ DVD-R (VR mode) HQ+, PCM, MN32 to MN16: 720 ×...
-
Page 144: Playback Settings (Playback)
HDD Recording Format Selects the HDD recording format. Video Mode Records to the HDD in VR mode. When recording stereo and bilingual programmes, both main and sub sounds can be recorded. Video Mode Records to the HDD in Video mode. When recording stereo and bilingual programmes, only one sound track (main or... -
Page 145: Limitation Settings (Parental Lock)
4:3 Letter Box 4:3 Pan Scan 16:9 Note Depending on the disc, “4:3 Letter Box” may be selected automatically instead of “4:3 Pan Scan” or vice-versa. Pause Mode Selects the picture quality in pause mode. Field Outputs a stable, generally shake-free image. - Page 146 Enter your four-digit password using the number buttons, and press ENTER. • To change the password, enter your four-digit password in the “Current Password” row using the number buttons, and press ENTER. Then enter a new password in the “New Password” row using the number buttons.
-
Page 147: Hdmi Settings (Hdmi Output)
HDMI Settings (HDMI Output) The “HDMI Output” setup allows you to adjust items related to the HDMI connection. You can select “HDMI Output” only when connecting equipment to the HDMI OUT jack. Press SYSTEM MENU while the recorder is in stop mode. Select “Initial Setup,”... - Page 148 Colour Selects the method of outputting video signals for the HDMI jack. RGB (0-255) Outputs RGB (0-255) signals. Select this when connecting to an RGB (0- 255) device. RGB (16-235) Outputs RGB (16-235) signals. Select this if colours appear overly rich and the black appears too deep.
-
Page 149: Other Settings (Options)
Turns off the lighting when the power is off. Command Mode Changes the Command Mode of the recorder to avoid interference with your other Sony DVD recorder or player. Select “Command Mode” in “Options,” and press ENTER. Select a Command Mode (DVD1, DVD2, or DVD3), and press ENTER. -
Page 150: Options 2
SMARTLINK This Recorder Allows you to use the Only SMARTLINK function with the recorder when the recorder is in standby mode. Pass Through Allows you to use the SMARTLINK function with the connected equipment when the recorder is in standby mode. Note Set “Power Save”... -
Page 151: Additional Information
Should any problem persist, consult your nearest Sony dealer. Power The power does not turn on. , Check that the mains lead is connected securely. - Page 152 , If the HDMI OUT jack is used for video output, changing the “Screen Resolution” setting in the “HDMI Output” setup may solve the problem (page 147). Connect the TV and the recorder using a video jack other than HDMI OUT, and switch the TV’s input to the connected video input so that you can see the on-screen displays.
- Page 153 GUIDE Plus+ system (in the UK only) GUIDE Plus+ system does not appear. , 1Even if you complete “Easy Setup,” TV programme listings do not appear until the recorder receives the GUIDE Plus+ data. 2Turn off the recorder, but do not unplug it.
- Page 154 Sound distortion occurs. , Set “Analog Tuner Level” in the “Audio In” setup to “Compression” (page 137). Sound is noisy. , When playing a CD with DTS sound tracks, noise will come from the LINE 2 OUT R- AUDIO-L jacks, LINE 3 – TV jack, or LINE 1/DECODER jack (page 109).
- Page 155 The subtitle language cannot be changed or turned off. , Multilingual subtitles are not recorded on the DVD VIDEO. , The DVD VIDEO prohibits changing of the subtitles. , Try changing the subtitle using the DVD VIDEO’s menu. , The subtitles cannot be changed for the titles recorded on this recorder.
-
Page 156: Remote Control
Recording does not stop immediately after you press x REC STOP. , It will take a few seconds for the recorder to input disc data before recording can stop. On-screen instructions may appear after pressing x REC STOP. In this case, follow the on-screen instructions. - Page 157 Lock (page 81, 108). The disc tray does not open and “TRAYLOCKED” appears in the front panel display. , Contact your Sony dealer or local authorized Sony service facility. “REPAIR” appears in the front panel display. , The recorder’s repair function is activated...
-
Page 158: Resetting The Recorder
Mechanical sounds are heard when the recorder is off. , While the recorder is updating the EPG information, operational noises (such as the internal fan) may be heard, even when the power is off. This is not a malfunction. , While the recorder is adjusting the clock for the Auto Clock Set function or updating the EPG information, operational noises may be heard, even when the power is off. -
Page 159: Notes About This Recorder
Notes About This Recorder On operation • If the recorder is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the recorder. Should this occur, the recorder may not operate properly. -
Page 160: Specifications
Power requirements: 220-240 V AC, 50/60 Hz Power consumption: 49 W Dimensions (approx.): 430 × 76.5 × 286 mm (width/height/ depth) incl. projecting parts Hard disk drive capacity: RDR-HXD770: 120 GB RDR-HXD870: 160 GB RDR-HXD970: 250 GB RDR-HXD1070: 500 GB Mass (approx.): 4.7 kg... -
Page 161: Files
Operating temperature: 5ºC to 35ºC Operating humidity: 25% to 80% Supplied accessories: Mains lead (1) Aerial cable (1) Remote commander (remote) (1) Set top box controller (1) R6 (size AA) batteries (2) Specifications and design are subject to change without notice. Notes on MP3 Audio Tracks, JPEG Image Files, and DivX Video... -
Page 162: The Recorder Can Play
MP3 audio tracks, JPEG image files, or DivX video files that the recorder can play The recorder can play the following tracks and files: – MP3 audio tracks with the extension “.mp3.” – JPEG image files with the extension “.jpeg” or “.jpg.”... -
Page 163: About I.link
About the name “i.LINK” i.LINK is a more familiar term for IEEE 1394 data transport bus proposed by SONY, and is a trademark approved by many corporations. IEEE 1394 is an international standard standardized by the Institute of Electrical and Electronics Engineers. -
Page 164: Guide To Parts And Controls
Guide to Parts and Controls For more information, see the pages in parentheses. Remote A HDD button (36) DVD button (36) B [/1 (on/standby) button (26) C Z (open/close) button (36) D PROG (programme) +/– buttons (36) The + button has a tactile dot E Number buttons (42, 89) The number 5 button has a tactile dot F INPUT (input select) button (61, 79) -
Page 165: Front Panel
wl PLAY MODE button (84, 89, 109, 111) e; TV t (input select) button (24) ea TV (volume) +/– buttons (24) Front panel A [/1 (on/standby) button (26) (remote sensor) (24) C Disc tray (36) D Front panel display (166) E Z (open/close) button (36) F N (play) button (80, 108, 124) button has a tactile dot... -
Page 166: Rear Panel
Front panel display A Displays the following: • Playing time • Current title/chapter/track/index number • Recording time/recording mode • Clock • Programme position • EPG indication (63) “EPG” appears when receiving the GUIDE Plus+ data. • TV Direct Rec. indication (36): “TV”... -
Page 167: Language Code List
Language Code List For details, see page 140. The language spellings conform to the ISO 639: 1988 (E/F) standard. Number Language Number Language Number Language (code) (code) (code) -
Page 168: Country/Area Code
Country/Area Code For details, see page 145. Number Area (Code) 0118 Argentina (ar) 0121 Australia (au) 0120 Austria (at) 0205 Belgium (be) 0218 Brazil (br) 0301 Canada (ca) 0312 Chile (cl) 0314 China (cn) 0411 Denmark (dk) 0609 Finland (fi) 0618 France (fr) 0405... -
Page 169: Index
Index Words in quotations appear in the on-screen displays. Numerics “16:9” 144 “4:3 Letter Box” 144 “4:3 Pan Scan” 144 “96 kHz PCM Output” 139 “A-B Erase” 93 “A-B Repeat” 84 “Add New Channels” 131 Adjusting playback picture 85 recording picture 59 Aerial 15 “AFT”... - Page 170 DV camcorder 104 DV camcorder dubbing 104 “Manual Dubbing” “One-Touch Dubbing” 106 “Playback” 107 DV IN 104 “DV Input” 105 “DVD Backup” 103 “DVD Menu Language” “DVD Playback” 146 DVD VIDEO 12 DVD+R 10 DVD+RW 10 DVD-R 10 DVD-RAM 12 DVD-RW 10 Easy Setup 26 “Edit”...
- Page 171 Page mode 39 Parental Lock 81 Parts and controls 164 Pause Live TV 87 “Pause Mode” 145 PAY-TV 33 PBC 80 PDC 54 “Photo Album” 118 “Photo Album” list 122 “Picture Adjustment” 76 Picture quality 59 PLAY MODE 84 “Play Mode” 117 Play mode “A-B Repeat”...
- Page 172 Super VIDEO CD 12 “S-Video” 136 Thumbnail picture 39 preview mode 40 “Time Search” 89 TIMER 54 Timer List 60 Sony Corporation Printed in Hungary Timer recording check/change/cancel EPG timer setting 55 GUIDE Plus+ system manual setting 53 “Rec. Mode Adjust”...