Example Of Line-By-Line Switchover; System-Technical Settings - Siemens SICAM AK Manual

2.5.3

Example of Line-by-Line Switchover

2.5.3.1

System-Technical Settings

In both systems SICAM AK, select the menu Redundancy under the M-CPU.
Select the parameter
voting via the relevant pull-down menu. This enables the device to apply the "line-by-line
switchover".
Under Settings for PREs, select the PRE on the M-CPU (connected to the voter) as
via the parameter
deactivated
All the other PREs are selected as
position.
Copy all the parameters from SICAM AK A to SICAM AK B and change the IP address of
SICAM AK B.
SICAM RTUs, SICAM AK Redundancy
DC2-026-2.07, Edition 10.2016
Redundancy control
Option: preferred position
via the parameter
Option: user data filter
Passive
as Line. redundancy switchover with appl.
and select the
deact.
via the parameter
Option: preferred
Unrestricted
Redundancy via CP-6010
Active
User data filter
113