Panasonic LP-400 Series External Control Manual page 133

⿎ Trigger condition : TRG
Sets the flying object/static object marking, and the condition of flying object.
• Setting / Readout data of trigger condition
Sub
STX TRG
command
Sub command is "S" at the time of setting and "A" for response data at the time of readout.
• Readout request of trigger condition
STX TRG R
Data
Name length
[byte]
Moving direction 1
Encoder 1
Trigger type 1
Reference
• The setting changed by this command is saved without overwriting.
[Moving direction] [Encoder] [Trigger type]
3-byte
(Check sum) Delimiter
Description
"0": still
"1": left
"2": right
"3": front
"4": back
"0": OFF
"1": ON
"0": trigger marking
"1": Equidistant marking
ME-LP400V-EX-6
(Check
sum)
Remarks
The moving direction of line at marking to flying object
is set.
The ON/OFF of encoder signal is indicated.
Available only when the "moving speed" is "still".
Select the laser emission timing between trigger input
timing and equal interval timing.
Delimiter
133