Menus And Fields Changed By The Autoscale Algorithm - HP 16534A User Reference

Autoscale

Menus and Fields Changed by the Autoscale Algorithm

Menus and Fields Changed by the Autoscale Algorithm
The following table shows the menus and their fields that are changed
by the autoscale algorithm.
Settings Changed by Autoscale
Menu Field
Channel V/Div
Offset
Trigger Mode
Source
Level
Slope
Count
Auto-Trig
All Applicable s/Div
Delay
2-6
Autoscale Action
Scaled - depending on amplitude of input signal.
Scaled - depending on offset of input signal.
Defaults to Edge.
Either channel 1 or channel 2. If no input signal exists for channel 1 or channel 2, it
defaults to channel 1.
Scaled - depending on amplitude of lowest numbered input with signal present.
Defaults to Positive.
Defaults to 1.
Defaults to On.
Scaled - depending on frequency of lowest numbered input with signal present.
Defaults to 0 s.