Wheel Hub And Steering Knuckle - Suzuki Ignis Service Manual

WHEEL HUB AND STEERING KNUCKLE

1. Front wheel hub
2. Circlip
3. Wheel bearing
: Face grooved rubber seal side to wheel hub.
4. Steering knuckle
5. Drive shaft nut
: Calk, after tightening.
6. Hub bolt
REMOVAL
1) Hoist vehicle and remove wheel.
2) Uncaulk drive shaft nut (1).
3) Depress foot brake pedal and hold it there. Remove drive
shaft nut (1).
4) Remove caliper carrier bolts.
5) Remove caliper (1) with carrier.
NOTE:
Hang removed caliper with a wire hook or the like (3) so
as to prevent brake hose (4) from bending and twisting
excessively or being pulled.
Don't operate brake pedal with pads removed.
6) Pull brake disc (2) off by using two 8 mm bolts.
FRONT SUSPENSION 3D-11
Tightening torque
Do not reuse.