Domain; Table 17 Eth-Cfm Command; Table 18 Domain Command - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
Table 17
3.17.4.2
Table 18
Issue: 13
eth-cfm command
Item Description
Syntax eth-cfm
Context configure
Description This command enables the context to configure 802.1ag CFM parameters

domain

domain command
Item Description
Syntax domain md-index [format {dns | mac | none | string}] name md-name level level
domain md-index
no domain md-index
Context configure>eth-cfm
Description This command configures Connectivity Fault Maintenance Domain parameters.
The no form of the command removes the MD index parameters from the configuration.
Parameters md-index — Specifies the Maintenance Domain (MD) index value.
Values: 1...4294967295
format {dns | mac | none | string} — Specifies a value that represents the type (format).
Values:
•
dns: Specifies the DNS name format.
•
mac: X:X:X:X:X:X-u
where:
X: [0...FF]h
u: [0...65535]d
•
none: Specifies a Y.1731 domain format and the only format allowed to execute Y.1731
specific functions
•
string: Specifies an ASCII string.
Default: string
name md-name - Specifies a generic Maintenance Domain (MD) name.
Values: 1...43 characters
level level - Specifies the integer identifying the maintenance domain level (MD Level). Higher
numbers correspond to higher maintenance domains, those with the greatest physical reach,
with the highest values for customers' CFM packets. Lower numbers correspond to lower
maintenance domains, those with more limited physical reach, with the lowest values for single
bridges or physical links.
Values: 0...7
3HH-11985-AAAA-TQZZA
Services Overview
87