Table of Contents
Advertisement
Example
This program message initializes the disk, selects the module in slot A,
then stores the file. In this example, :MMEMORY must be sent again
in order to re-enter the memory subsystem and store the file.
":MMEMORY:INITIALIZE;:SELECT 1;:MMEMORY:STORE 'FILE
'DESCRIPTION'"
Status Registers
Each status register has an associated status enable (mask) register.
By setting the bits in the status enable register you can select the
status information you wish to use. Any status bits that have not been
masked (enabled in the enable register) will not be used to report
status summary information to bits in other status registers.
See Also
Chapter 7, "Status Reporting," for a complete discussion of how to
read the status registers and how to use the status information
available from this instrument.
Common Commands
',
9–3
- Quick Links:
- Introduction
Hide quick links:
Advertisement
Table of Contents
